Equipped with the RUN output for checking the operation status, as well as the replacement notification function for easy maintenance. Lineup of five models including the AC power supply (25W).
Please refer to the overview page for features of this product.
The replacement notification function can prevent an overflow of the system due to the power lifetime. (CJ1W-PA205C only)
Power Supply Unit provides wide variations according to the system scale up to maximum 25 W.
Power Supply Unit provides wide variations according to the power supply (100 to 240 V AC/ 24 V DC) status.
The output contact during operation enables you to check the CPU operation. (CJ1W-PA205R only)
Conforming to the SEMI-F47 Standard. *
* AC input type, 200 V min. input.
International Standards
- The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
- Contact your OMRON representative for further details and applicable conditions for these standards.
Power Supply Units
| Product name | Power supply voltage | Output capacity | Options | Model | Stand- ards | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| 5-VDC output capacity | 24-VDC output capacity | Total power con- sumption | 24-VDC service power supply | RUN output | Mainte- nance forecast monitor | |||||
| AC Power Supply Unit |  | 100 to 240 VAC | 5 A | 0.8 A | 25 W | No | No | Yes | CJ1W-PA205C | UC1, N, L, CE |
 | Yes | No | CJ1W-PA205R | |||||||
 | 2.8 A | 0.4 A | 14 W | No | No | CJ1W-PA202 | ||||
| DC Power Supply Unit |  | 24 VDC | 5 A | 0.8 A | 25 W | No | No | CJ1W-PD025 | ||
 | 2 A | 0.4 A | 19.6 W | No | No | CJ1W-PD022 | UC1, CE | |||
Note: This unit cannot be used with the Machine Automation Controller NJ-series.
Accessories
There is no accessory for the CJ series Power Supply Unit.
Tidak ada komentar:
Posting Komentar