AUTOMATION JAYA

WEISS Handling Systems ST Series The ST rotating unit with direct drive and absolute encoder is exactly designed to match fast, precise and highly dynamic rotating, tilting and gripping applications. Whether in orientating parts, utilization as a tilting-unit for grippers, or a replacement for standard servomotors with gearbox the ST offers the optimal solution. The compact profile, low weight and various mounting-possibilities as well as the ­different drive shafts and mechanical configurations open a wide range of applications. THE ST AT A GLANCE User programmable Speed adjustable Acceleration adjustable Extremely dynamic Long lifetime No maintenance cost Low energy consumption Compact design Rigid mechanical design No oil or gears Various sizes and designs High protection degree Useable in cleanroom environment Absolute encoder Light weight High power density

WEISS Handling Systems SH75 New version available in June 2013! With independent servo axes, the SH 75 has massive potential for all manner of lifting and rotating tasks and offers extremely simple operation and fast set up THE SH AT A GLANCE Extremely easy to use Very short set up times Compact design High performance Freely programmable Independent servo axes Clear interfaces / simple data exchange

WEISS Handling Systems PICK-O-MAT The powerful yet affordable electromechanical assembly system for high volumes and minimum integration costs. THE PICK-O-MAT AT A GLANCE Central drive with up to 24 pick&place, pressing or lifting modules High speed with up to 80 cycles per minute Two sizes: PM1100 PM1500 High degree of flexibility through individual positioning of the handling units Simple T-slot positioning Adjustable pick&place, press and test modules Robust design Simple control through just two drives

WEISS Handling Systems HP Series Whether HP140 or HP70: The Pick&Place from WEISS work with two linear axes and due to this profit from all advantages of a direct drive: rapid dynamic performance, free user-programmability, minimal wear and highest precision. The compact modules get with the extra slim HP70 reinforcement for place-saving applications. The HP overcomes limits of traditional pneumatic systems regarding variability, dynamic performance and efficiency. THE HP AT A GLANCE Extremely compact design Highly dynamic Ready-for-installation, customer-friendly complete solution (plug&play) Freely programmable Permanent feedback of position, process forces, speed (adjustable control circuit) Significantly lower energy consumption, in particular in comparison with pneumatic systems WAS – WEISS Application Software for simple commissioning Excellent price-quality ratio Overload protection Interfaces to all common fieldbus systems Whether H...

WEISS Handling Systems HL Series The linear motor axis HL provides, without any doubt, the most modern drive ­technology which is highly integrated and ready to mount. Tight and precise ­recirculating ball bearings and an absolute measurement system as well as the ­automatic lubrication are all included in this product. The result: Rapid and harmonic movements, horizontal or vertical mounting and ­loading on the rigth or left side is possible. THE HL AT A GLANCE User programmable Extreme dynamics Monitored movements Long lifetime No maineance cost Compact architecture Stiff mechanical assembling No oil / No gear Various sizes and shapes available Absolute encoder (up to 500 mm) Light weight High power density No wearing parts

WEISS Handling Systems HG/HN Series   The latest in uncompromising, highly dynamic drive technology for your basic axis. Highly integrated and ready for installation. Compact and precise ball-type linear guides and an absolute measuring system are just as much a part of the concept as the automatic lubrication. The HN version is available in many different sizes – with a robust steel body or lightweight aluminium body. The aluminium profile-based HG axes can also be used in areas in which cost factors have typically made conventional drives the standard choice in the past: the most advanced linear technology at extremely attractive conditions. Both versions impress with their smooth movements and maximum dynamics.   THE KEY ADVANTAGES AT A GLANCE Freely positionable Extreme dynamics Monitored movements No maintenance costs, no wearing parts Hygienic linear drive/no pneumatics, no oil, no gearbox Low energy costs Compact design Convincing price-qu...

WEISS Freely Programmable Indexers TW Series A direct drive motor integrated with a high-precision gear, absolute encoder and built-in ­brake combined with a robust mechanical platform. The TW sets new standards in the compact rotary indexing table-area in the following ­characteristics: dynamic, precision, user programmable and ease of use, power density. ­These products are designed to greatly outperform any pneumatic indexing solutions available. Additional user benefits: Comparable in cost to pneumatic solutions, a clear cost advantage is developed through enhancement in productivity, lower operating cost and reduced ­maintenance cost. THE TW AT A GLANCE User programmable Much faster than pneumatic solution Much more precise than pneumatic solution Higher power density than pneumatic solution Very little dwelltime Absolute encoder Precise zero-point through locating holes in the body No wear Precise teaching of each position Rigid stationary cen...

WEISS Freely Programmable Indexers TO Series Direct drive rotary table with impressive dynamics and extremely high degree of repeat accuracy. Freely programmable and also suitable for use in clean rooms. The direct drive rotary table allows the shortest switching times with the greatest precision. Its ability to cover a significantly more versatile range of tasks – including repeat use – helps you tap new added value potential. THE TO AT A GLANCE Freely programmable angular positions and speeds Greatest efficiency Extremely dynamic (up to 600 cycles/min) Extremely high repeat accuracy Absolute measuring system on TO 150C / TO 220C High degree of reliability, long service life, zero backlash No wearing parts Compact design, minimum installation space required No cooling devices necessary WAS – WEISS Application Software for simple commissioning

WEISS Freely Programmable Indexers TH Series The heavy duty ring TH combines free programmability and an extremely high level of torque with the ability to handle horizontal loads and high breakdown torque levels. THE TH AT A GLANCE Freely programmable TH rotary barrel drives for horizontal loads and high breakdown torque levels Connection of different motor brands possible Extremely smooth and quiet running (70 dBA) Zero backlash thanks to multiple cam rollers tensioned against one another The highest parts and repeat accuracy Permanent status monitoring through WAS – WEISS Application Software Central bore for cable entries

WEISS Freely Programmable Indexers NR Series Freely programmable rotary indexing ring with very large central opening, extremely flat design and a high level of parts accuracy. The ring-shaped design allows extra free design space. The rotating aluminium ring can be adjusted to your specifications in terms of diameter and thickness. THE NR AT A GLANCE Ring-shaped rotary indexing table with extremely large central opening (bore of up to 1750 mm possible) High level of parts accuracy due to drive being positioned far toward the outside Highly dynamic with smooth acceleration Connection of different motor brands possible Flat, compact design Fixed speed TR version also available Excellent price-performance ratio Absolute measuring system WAS – WEISS Application Software for simple commissioning

WEISS Freely Programmable Indexers NC Series NOW WITH LARGE CENTRAL OPENING. THE NEW NC RANGE The NC combines robustness and durability with the advantages of a user-programmable rotary table that offers a high level of torque. This is made possible by the latest generation of servo motor drives with integrated absolute value encoder and a drive cam with constant pitch. For applications requiring extreme precision, we offer the additional encoder option, which is connected directly to the drive cam. The further refined NC range has been given a significantly larger central opening. The cables and hoses can now be guided downwards directly through the table or through the practical side channel. We have achieved this while maintaining the same external dimensions as its predecessors – which have now been replaced by the new range. THE NC AT A GLANCE Freely programmable High level of torque Absolute position encoder High precision, rigid rotating plate ...

WEISS Freely Programmable Indexers CR Series Flat heavy duty ring with large central opening. The extremely flat design frees up space and offers flexibility for creating ergonomically sound workplaces. Using the WAS control system, the ring is completely freely programmable. THE CR AT A GLANCE Unmatched e-stop times Large central opening for cable entries Freely programmable Extremely smooth and quiet running (<70 dBA) Zero backlash thanks to multiple cam rollers tensioned against one another Extremely accurate and smooth Cam drive located far toward the outside for precision and dynamics Permanent status monitoring through WAS – WEISS Application Software Drive can be connected directly to robot control systems Connection of different motor brands possible