WEISS Handling Systems ST Series

The ST rotating unit with direct drive and absolute encoder is exactly designed to match fast, precise and highly dynamic rotating, tilting and gripping applications.

Whether in orientating parts, utilization as a tilting-unit for grippers, or a replacement for standard servomotors with gearbox the ST offers the optimal solution.

The compact profile, low weight and various mounting-possibilities as well as the ­different drive shafts and mechanical configurations open a wide range of applications.

THE ST AT A GLANCE

• User programmable
• Speed adjustable
• Acceleration adjustable
• Extremely dynamic
• Long lifetime
• No maintenance cost
• Low energy consumption
• Compact design
• Rigid mechanical design
• No oil or gears
• Various sizes and designs
• High protection degree
• Useable in cleanroom environment
• Absolute encoder
• Light weight
• High power density

WEISS Handling Systems SH75

New version available in June 2013!

With independent servo axes, the SH 75 has massive potential for all manner of lifting and rotating tasks and offers extremely simple operation and fast set up

THE SH AT A GLANCE

• Extremely easy to use
• Very short set up times
• Compact design
• High performance
• Freely programmable
• Independent servo axes
• Clear interfaces / simple data exchange

WEISS Handling Systems PICK-O-MAT

The powerful yet affordable electromechanical assembly system for high volumes and minimum integration costs.

THE PICK-O-MAT AT A GLANCE

• Central drive with up to 24 pick&place, pressing or lifting modules
• High speed with up to 80 cycles per minute
• Two sizes:
  PM1100
  PM1500
• High degree of flexibility through individual positioning of the handling units
• Simple T-slot positioning
• Adjustable pick&place, press and test modules
• Robust design
• Simple control through just two drives

WEISS Handling Systems HP Series

Whether HP140 or HP70: The Pick&Place from WEISS work with two linear axes and due to this profit from all advantages of a direct drive: rapid dynamic performance, free user-programmability, minimal wear and highest precision.

The compact modules get with the extra slim HP70 reinforcement for place-saving applications. The HP overcomes limits of traditional pneumatic systems regarding variability, dynamic performance and efficiency.

THE HP AT A GLANCE

• Extremely compact design
• Highly dynamic
• Ready-for-installation, customer-friendly complete solution (plug&play)
• Freely programmable
• Permanent feedback of position, process forces, speed (adjustable control circuit)
• Significantly lower energy consumption, in particular in comparison with pneumatic systems
• WAS – WEISS Application Software for simple commissioning
• Excellent price-quality ratio
• Overload protection
• Interfaces to all common fieldbus systems

Whether HP140 or HP70: The Pick&Place from WEISS work with two linear axes and due to this profit from all advantages of a direct drive: rapid dynamic performance, free user-programmability, minimal wear and highest precision.

The compact modules get with the extra slim HP70 reinforcement for place-saving applications. The HP overcomes limits of traditional pneumatic systems regarding variability, dynamic performance and efficiency.

WEISS Handling Systems HL Series

The linear motor axis HL provides, without any doubt, the most modern drive ­technology which is highly integrated and ready to mount. Tight and precise ­recirculating ball bearings and an absolute measurement system as well as the ­automatic lubrication are all included in this product.

The result: Rapid and harmonic movements, horizontal or vertical mounting and ­loading on the rigth or left side is possible.

THE HL AT A GLANCE

• User programmable
• Extreme dynamics
• Monitored movements
• Long lifetime
• No maineance cost
• Compact architecture
• Stiff mechanical assembling
• No oil / No gear
• Various sizes and shapes available
• Absolute encoder (up to 500 mm)
• Light weight
• High power density
• No wearing parts

WEISS Handling Systems HG/HN Series 

The latest in uncompromising, highly dynamic drive technology for your basic axis. Highly integrated and ready for installation. Compact and precise ball-type linear guides and an absolute measuring system are just as much a part of the concept as the automatic lubrication.

The HN version is available in many different sizes – with a robust steel body or lightweight aluminium body. The aluminium profile-based HG axes can also be used in areas in which cost factors have typically made conventional drives the standard choice in the past: the most advanced linear technology at extremely attractive conditions. Both versions impress with their smooth movements and maximum dynamics.

 

THE KEY ADVANTAGES AT A GLANCE

• Freely positionable
• Extreme dynamics
• Monitored movements
• No maintenance costs, no wearing parts
• Hygienic linear drive/no pneumatics, no oil, no gearbox
• Low energy costs
• Compact design
• Convincing price-quality ratio (particularly in the case of HG axes)
• HN axes with high power density available in many different sizes
• HG axes with covered guide profile with standard attachment options
• Absolute measuring system (up to 1,000 mm)

WEISS Freely Programmable Indexers TW Series

A direct drive motor integrated with a high-precision gear, absolute encoder and built-in ­brake combined with a robust mechanical platform.

The TW sets new standards in the compact rotary indexing table-area in the following ­characteristics: dynamic, precision, user programmable and ease of use, power density. ­These products are designed to greatly outperform any pneumatic indexing solutions available.

Additional user benefits: Comparable in cost to pneumatic solutions, a clear cost advantage is developed through enhancement in productivity, lower operating cost and reduced ­maintenance cost.

THE TW AT A GLANCE

• User programmable
• Much faster than pneumatic solution
• Much more precise than pneumatic solution
• Higher power density than pneumatic solution
• Very little dwelltime
• Absolute encoder
• Precise zero-point through locating holes in the body
• No wear
• Precise teaching of each position
• Rigid stationary center section in various levels
• Electronic overload protection
• Any mounting position possible
• High energy efficiency
• Indexing in any angles possible

WEISS Freely Programmable Indexers TO Series

Direct drive rotary table with impressive dynamics and extremely high degree of repeat accuracy. Freely programmable and also suitable for use in clean rooms.

The direct drive rotary table allows the shortest switching times with the greatest precision. Its ability to cover a significantly more versatile range of tasks – including repeat use – helps you tap new added value potential.

THE TO AT A GLANCE

• Freely programmable angular positions and speeds
• Greatest efficiency
• Extremely dynamic (up to 600 cycles/min)
• Extremely high repeat accuracy
• Absolute measuring system on TO 150C / TO 220C
• High degree of reliability, long service life, zero backlash
• No wearing parts
• Compact design, minimum installation space required
• No cooling devices necessary
• WAS – WEISS Application Software for simple commissioning

WEISS Freely Programmable Indexers TH Series

The heavy duty ring TH combines free programmability and an extremely high level of torque with the ability to handle horizontal loads and high breakdown torque levels.

THE TH AT A GLANCE

• Freely programmable TH rotary barrel drives for horizontal loads and high breakdown torque levels
• Connection of different motor brands possible
• Extremely smooth and quiet running (70 dBA)
• Zero backlash thanks to multiple cam rollers tensioned against one another
• The highest parts and repeat accuracy
• Permanent status monitoring through WAS – WEISS Application Software
• Central bore for cable entries

WEISS Freely Programmable Indexers NR Series

Freely programmable rotary indexing ring with very large central opening, extremely flat design and a high level of parts accuracy.

The ring-shaped design allows extra free design space. The rotating aluminium ring can be adjusted to your specifications in terms of diameter and thickness.

THE NR AT A GLANCE

• Ring-shaped rotary indexing table with extremely large central opening (bore of up to 1750 mm possible)
• High level of parts accuracy due to drive being positioned far toward the outside
• Highly dynamic with smooth acceleration
• Connection of different motor brands possible
• Flat, compact design
• Fixed speed TR version also available
• Excellent price-performance ratio
• Absolute measuring system
• WAS – WEISS Application Software for simple commissioning

WEISS Freely Programmable Indexers NC Series

NOW WITH LARGE CENTRAL OPENING. THE NEW NC RANGE

The NC combines robustness and durability with the advantages of a user-programmable rotary table that offers a high level of torque. This is made possible by the latest generation of servo motor drives with integrated absolute value encoder and a drive cam with constant pitch. For applications requiring extreme precision, we offer the additional encoder option, which is connected directly to the drive cam.

The further refined NC range has been given a significantly larger central opening. The cables and hoses can now be guided downwards directly through the table or through the practical side channel. We have achieved this while maintaining the same external dimensions as its predecessors – which have now been replaced by the new range.

THE NC AT A GLANCE

• Freely programmable
• High level of torque
• Absolute position encoder
• High precision, rigid rotating plate bearing mounting
• Various sizes
• Powerful, standing centre part
• Connection of different motor brands possible
• Customer-specific servo motors
• High degree of synchronism
• High degree of repeat accuracy
• WAS – WEISS Application Software for simple commissioning

WEISS Freely Programmable Indexers CR Series

Flat heavy duty ring with large central opening. The extremely flat design frees up space and offers flexibility for creating ergonomically sound workplaces. Using the WAS control system, the ring is completely freely programmable.

THE CR AT A GLANCE

• Unmatched e-stop times
• Large central opening for cable entries
• Freely programmable
• Extremely smooth and quiet running (<70 dBA)
• Zero backlash thanks to multiple cam rollers tensioned against one another
• Extremely accurate and smooth
• Cam drive located far toward the outside for precision and dynamics
• Permanent status monitoring through WAS – WEISS Application Software
• Drive can be connected directly to robot control systems
• Connection of different motor brands possible

WEISS Fixed Stations Indexer TR Series

Rotary indexing ring with large open center. Extremely low profile design with high level of accuracy.

The ring-shaped design allows extra free design space. The rotating aluminium ring can be adjusted to your specifications in terms of diameter and thickness.

THE TR AT A GLANCE

• Ring-shaped rotary indexing table with extremely large open center of up to 1750 mm possible
• High level of accuracy due to drive being positioned near outer edge
• Highly dynamic with smooth motion
• Low profile, compact design
• Freely programmable NR version also available
• Tailor-made control system components (EF; TS)