LT-4201M MOdel PFXLM4201TADDK HMI Touchscreen 3.5" DC

PFXLM4201TADDK Modular Type DIO Model (Sink Output Type)

PFXLM4201TADDK Feature

• Analog Touch Panel
• Serial
• Output type sink
• Rated voltage 24 VDC
• Power Supply input range 19.2 ~ 28.8 VDC
• Response time for original input 2ms
• input impedance 3.2 kΩ
• I/O (Built-in)
• USB
• Sink Output
• Ethernet
• Standard Compliance IEC 61131-2
• Vibration immunity (operating) IEC 61131-2
• Protection structure NEMA type 4x (indoors, with panel embedded)

Functional Specifications

Display Type			TFT Color LCD
Display Size			3.5"
Resolution			320 x 240 pixels (QVGA)
Effective Display Area			70.56 x 52.92 mm (2.78 x 2.08 in.)
Display Colors			65,536 Colors
Backlight			White LED (User nonreplaceable parts. When replacement is required, contact your local distributor.)
			Non-exchangeable
			LED ON / OFF control, adjustable screen saver activation time
Brightness adjustment			16 Levels (Adjusted with the touch panel or the software)
Language Fonts			Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai
Character Sizes			8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts
Font Sizes			Width can be expanded 1 to 8 times. Height can be expanded 1/2 and 1 to 8 times.
Text	8 x 8 dots		40 characters per row x 30 rows
	8 x 16 dots		40 characters per row x 15 rows
	16 x 16 dots		20 characters per row x 15 rows
	32 x 32 dots		10 characters per row x 7 rows
	Variable Area		FLASH EPROM 16 MB (includes screen editing program and extended logic program)
	Logic Program Area		FLASH EPROM 132 KB (equivalent to 15,000 steps)
Application Memory			FLASH EPROM 8 MB
Font area			FLASH EPROM 8 MB (when limit exceeded, uses application memory)
Data Backup			nvSRAM 128 KB (rechargeable lithium battery for data backup)
Variable area			nvSRAM 64 KB (rechargeable lithium battery for data backup)
Touch Panel Type			Resistive Film (analog)
Touch Panel Service Life			1,000,000 times or more
Interface	Serial (COM1)		RS-232C/RS485 x 1 RS-232C (Connector type: RJ45, Isolation: None, Maximum baud rate: 115,200 bps, Cable Type: Shielded, Cable Maximum length: 15 m (49 ft), 5 Vdc power supply for RS-232C: None) RS-485 (Connector type: RJ45, Isolation: None, Maximum baud rate: 115,200 bps, Cable Type: Shielded, Cable Maximum length: 200 m (656 ft), Polarization: Setting is required via software when connecting Multiple LTs. Refer to the "GP-Pro EX Device/ PLC Manual" for the setting. 5 Vdc power supply for RS-485: None)
	CANopen (Master)		CAN-CiA (ISO 11898-2:2002 Part 2), Connector: D-sub9 (plug)
	Ethernet (LAN)		IEEE802.3 compliant Ethernet x 1 (Connector type: RJ45, Driver: 10 M half duplex (auto negotiation)/ 100 M full duplex (auto negotiation), Cable type: Shielded, Automatic cross-over detection: Yes)
	USB (TYPE-A)		USB 2.0 (Type A) x 1 (Power Supply Voltage: 5Vdc +/-5%, Maximum Current Supplied: 500mA, Maximum Transmission Distance: 5m (16.4 ft.))
	USB (mini-B)		USB 2.0 (Mini-B) x 1
	Control    DIO(Sink Type)		20 Points Standard Input (including 2 Points for Fast Input) 10 Points Standard Output, 2 Points for Fast Output
	Control	DIO(Sink Type)	20 Points Standard Input (including 2 Points for Fast Input) 10 Points Standard Output, 2 Points for Fast Output

General Specifications

Rated Input Voltage		DC 24 V
Input Voltage Limits		DC20.4 to 28.8V
Acceptable Voltage Drop		10 ms or less at 20.4 Vdc
Power Consumption		9 W or less
In-Rush Current		30 A or less at 28.8 Vdc
Voltage Endurance		500 Vdc for 1 minute
Insulation Resistance		10 MΩ or higher at 500 Vdc

Environmental Specifications

Standard compliance		IEC 61131-2
Ambient operating temperature for the display and the rear module	Horizontal installation	0 to 50°C (32 to 122°F)
	Vertical installation	0 to 40°C (32 to 104°F)
Storage temperature		- 20 to 60°C (- 4 to 140°F)
Storage altitude		0 to 10,000 m (0 to 32,808 ft)
Operating altitude		0 to 2,000 m (0 to 6,560 ft)
Surrounding Air and Strage Humidity		5 to 85% w/o condensation (non-condensing, wet bulb temperature 39°C (102.2°F) or less)
Degree of pollution	IEC60664	2
Degree of protection	IEC61131-2	IP20 with protective covers in place
Corrosive gases		Free of corrosive gases
Dust		≤0.1 mg/m3 (10-7 oz/ft3) (non-conductive levels)
Atmospheric pressure (Operating Altitude)		800 to 1,114 hPa (2000 m (6,561 ft) or lower)
Vibration resistance	Mounted on a DIN rail	3.5 mm (0.138 in.) fixed amplitude from 5 to 8.4 Hz 9.8 m/s2 (1 gn) fixed acceleration from 8.4 to 150 Hz
	Mounted on a panel	3.5 mm (0.138 in.) fixed amplitude from 5 to 8.6 Hz 9.8 m/s2 (1 gn) fixed acceleration from 8.6 to 150 Hz
Mechanical shock resistance	Mounted on a DIN rail	147 m/s2 (15 gn) for a duration of 11 ms
	Mounted on a panel	147 m/s2 (15 gn) for a duration of 6 ms
Electrostatic discharge	IEC/EN 61000-4-2	8 kV (air discharge) 6 kV (contact discharge)
Rediated radio frequency electromagnetic fields	IEC/EN 61000-4-3	10 V/m (80 MHz to 3 GHz)
Fast transients / Burst noise	IEC/EN 61000-4-4	Power lines: 2 kV Digital I/O: 1 kV Relay outputs: 2 kV Ethernet line: 1 kV COM line: 1 kV CAN line: 1 kV
Surge immunity	IEC/EN 61000-4-5	Power supply: CM: 1 kV; DM: 0.5 kV Digital I/O: CM: 1 kV; DM: 0.5 kV Shielded cable: 1 kV CM = line-earth DM = line-line
Conducted disturbances induced by radio-frequency fields	IEC/EN 61000-4-6	10 Veff (0.15 to 80 MHz)
Mains terminal dusturbance voltage	EN 55011 (IEC/CISPR11)	150 to 500 kHz, quasi peak 79 dBμV 500 kHz to 30 MHz, quasi peak 73 dBμV
Electric field strength	EN 55011 (IEC/CISPR11)	30 to 230 MHz, quasi peak 10 m @40 dBμV/m 230 MHz to 1 GHz, quasi peak 10 m @47 dBμV/m
Vibration immunity (operating)		IEC 61131-2
Protection structure		NEMA TYPE 4X (indoors, with panel embedded)
Protection (front module)		IP65f - (IEC 60529)
Protection (rear module)		IP 20 - (IEC 60529)
Shock immunity (operating)		IEC 61131-2 15 gn 11 ms
Cooling method		Natural air circulation
Weight		496 g (17.49 oz)
Color		Front module: PT404 Rear module: RAL 7032
Material		Front module: PC/PBT Rear module: PC/PBT