Functional Specification
| Display Type | TFT Color LCD | |
| Display Size | 3.5" | |
| Resolution | 320 x 240 pixels (QVGA) | |
| Effective Display Area | W70.56 x H52.92 mm (W2.78 x H2.08 in.) | |
| Display Colors | 65,536 Colors | |
| Backlight | White LED (User nonreplaceable parts. When replacement is required, contact your local distributor.) | |
| Brightness Control | 16 Levels (Adjusted with the touch panel or the software) | |
| Backlight Service Life | 50,000 hrs. or more (continuous operation at 25°C [77 °F] before backlight brightness decreases to 50%) | |
| Language Fonts | Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters) ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.) | |
| Character Sizes | Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts | |
| Font Sizes | Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times. | |
| Text | 8 x 8 dots | 40 character x 15 rows |
| 8 x 16 dots | 20 character x 15 rows | |
| 16 x 16 dots | 10 character x 7 rows | |
| 32 x 32 dots | 40 characters x 30 rows | |
| Variable Area | FLASH EPROM 8 MB | |
| Logic Program Area | FLASH EPROM 132 KB (Equivalent to 15,000 steps) | |
| Application Memory | FLASH EPROM 8 MB | |
| Data Backup | Equivalent to 128KB | |
| Clock Accuracy | Uses the clock of an external device | |
| Touch Panel Type | Resistive Film (analog) | |
| Touch Panel Service Life | 1,000,000 times or more | |
| Interface | Serial (COM1) | RS-232C/422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Odd or Even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 to 115,200bps, 187,500 bps, Connector: D-Sub9 (plug) |
| Ethernet (LAN) | IEEE802.3i/ IEEE802.3u, 10BASE-T/100BASE-TX Connector: Modular jack (RJ-45) x 1 | |
| USB (TYPE-A) | USB2.0, Connector：Type A x 1, Power Supply Voltage：DC5V±5％、Maximum Transmission Distance：3m (9.84 ft.) or less | |
| USB (mini-B) | USB2.0, Connector：mini-B x 1, Power Supply Voltage：DC5V±5％、Maximum Transmission Distance：5m (16.40 ft.) or less | |
| SD Card | None | |
General Specification
| Rated Input Voltage | DC 24 V | |
| Input Voltage Limits | DC20.4 to 28.8V | |
| Allowable Voltage Drop | 10ms or less | |
| Power Consumption | 6.5W or less | |
| In-Rush Current | 30 A or less | |
| Voltage Endurance | 1,000 Vac 20 mA for 1 min (between charging and FG terminals) | |
| Insulation Resistance | 500 Vdc, 10 MΩ or more(between charging and FG terminals) | |
| Surrounding Air Temperature | 0 to 50 °C [32 to 122 °F] | |
| Storage Temperature | -20 to 60 °C [-4 to 140 °F] | |
| Ambient Humidity | 85% RH (Wet bulb temperature: 39 °C (102.2 °F) or less - no condensation.) | |
| Storage Humidity | 85% RH (Wet bulb temperature: 39 °C (102.2 °F) or less - no condensation.) | |
| Dust | 0.1 mg/m³ (10-7 oz/ft³) or less (non-conductive levels) | |
| Pollution Degree | For use in Pollution Degree 2 environment | |
| Atmosphere | Free of corrosive gases | |
| Air Pressure (altitude range) | 800 to 1,114 hPa (2,000 m [6,561ft.] above sea level or less) | |
| Vibration Resistance | IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (approx. 100 min) | |
| Noise Immunity | Noise voltage: 1,000Vp-p Pulse width: 1μs Rising time: 1ns Electrostatic Disc | |
| Electrostatic Discharge Immunity | 6 kV direct contact, 8 kV air contact | |
| Grounding | Functional grounding: Grounding resistance of 100Ω, 2mm² (AWG 14) or thicker wire, or your country's applicable standard. | |
| Structure | NEMA#250 TYPE 4X (indoor, installed in an enclosure) Display module: IP 65f (IEC60529) Rear module : IP 20 (IEC 60529) | |
| Cooling Method | Natural air circulation | |
| Weight Approx. | 0.36 kg (0.79 lb.) or less (main unit only) | |
.jpeg)
.jpeg)
Tidak ada komentar:
Posting Komentar