Jual Inverter Emerson Unidrive Ready Stock

Inverter Emerson M200

Flexible system integration with communications options.

• M200's SI interface enables integration with a wide range of available industry standard fieldbuses or extended I/O such as SI-Ethernet, SI-EtherCAT, SI-PROFINET, SI-PROFIBUS, SI-CANopen and SI-DeviceNet
• AI-485 Adaptor option permits connection to RS485 networks using Modbus RTU

Improve throughput with advanced open-loop motor control algorithms

• Rotor Flux Control (RFC-A) utilizes closed-loop current control to give maximum stability of induction motors at all powers

Install and configure quickly and easily

• Easy-to-use fixed LED keypad
• Useful parameter guide located on the front of the drive
• Use Unidrive M Connect PC tool or SD card with AI-Backup adaptor to clone and transfer parameter sets
• Din rail mounting is supported below 1.5kW

Inverter Emerson M100

Quick and easy to install and configure

• Easy-to-use fixed LED keypad
• Useful parameter guide located on the front of the drive
• Concise parameter set for ease of use
• Uses SD card with AI-Backup adaptor to clone and transfer parameter sets
• Open loop V/Hz mode is quick to configure and has autotuning
• DIN Rail mounting is supported below 1.5 kW

Reduced application size and cost

• Compact drive dimensions, among the smallest in class at every power rating

Save energy

• Low losses up to 98% efficient
• Low power standby mode

Robust design for industrial environments

• Conformal coating supported through extensive environmental testing and certification

Inverter Emerson M300

Conform to safety standards, maximize uptime and reduce costs by integrating directly with safety systems

• M300 has integrated dual STO inputs for SIL3, PLe conformity, eliminating the need for external safety components

Improve throughput with advanced open-loop motor control algorithms

• Rotor Flux Control (RFC-A) gives maximum stability and control of induction motors at all powers.
• 180% motor overload suitable for heavy industrial machinery applications

Flexible system integration with SI communications options

• M300's SI interface enables integration with a wide range of available industry standard fieldbuses and I/O

Install and configure quickly and easily

• Simple fixed LED keypad
• Useful parameter guide located on the front of the drive
• Use Unidrive M Connect or an SD card with the AI-Backup adaptor to clone and transfer parameter sets
• DIN rail mounting is supported below 1.5 kW

Inverter EMERSON M400

Minimize downtime and system set-up time with advanced keypad options

• Informative, multi-language, 3 line display aids set up and provides diagnostic information
• 4 navigation buttons facilitate intuitive navigation and programming
• Keypad options available:
• CI Keypad - Drive mounted LCD keypad
• Remote IP66 keypad - rapid panel mount (1 x 32mm Ø hole)
• No Keypad - Control/programming performed by PC or fieldbus

Reduced system costs by directly integrating with applications

• M400 incorporates an onboard PLC which can execute Machine Control Studio (IEC61131-3) programs for logic and sequencing with real-time tasks - removing the need for additional PLC's
• Fit an SI module to add a fieldbus communications option or additional I/O

Improve throughput with advanced openloop motor control algorithms

• Rotor Flux Control (RFC-A) gives maximum stability and control of induction motors at all powers
• 180% motor overload suitable for heavy industrial machinery applications
• Precise frequency following is possible from an encoder or frequency/direction inputs

Conform to safety standards, maximize uptime and reduce costs by integrating directly with safety systems

• M400 has integrated dual STO inputs for SIL3 / PLe conformity, eliminating the need for external safety components

Inverter Emerson M600

Enhanced throughput with high performance open-loop control of induction and permanent magnet motors

• Advanced Rotor Flux Control (RFC) algorithm gives maximum stability and control of induction and permanent magnet motors
• 200% motor overload suitable for heavy industrial machinery applications

Reduce system costs by directly integrating with applications

• M600 incorporates an onboard PLC which can execute Machine Control Studio (IEC61131-3) programs for logic control, sequencing, speed following and digital lock - removing the need for additional PLCs
• Fit up to three SI modules to add safe motion, speed feedback, additional I/O and fieldbus communications

Inverter Emerson M700

Maximize throughput with superior motor control

• High bandwidth motor control algorithm for closed-loop induction, permanent magnet and servo motors - 3000 Hz current loop bandwidth and 250 Hz speed loop bandwidth
• Flexible speed and position feedback interface supports a wide range of feedback technologies from robust resolvers to high resolution encoders
• Up to three encoder channels simultaneously e.g. 1 feedback encoder, 1 reference encoder and 1 simulated output
• MCi modules can eliminate the need for external PLCs and motion controllers
• Simulated encoder output can provide position reference for CAMs, digital lock and electronic gearbox applications

Optimize system performance with onboard Advanced Motor Controller

• M700 incorporates an Advanced Motion Controller capable of controlling 1.5 axes. The motion functions are carried out 'on the drive' so that system performance is maximized

Design flexible centralized and decentralized control systems

• MCi modules can be added to execute larger programs for advanced  system control capability
• Onboard PLC for logic programs
• Machine Control Studio is an industry standard IEC61131-3 programming environment for efficient system design and configuration
• Integrated dual port Ethernet switch provides simple connectivity using standard connections
• Onboard real-time Ethernet (IEEE 1588 V2) uses RTMoE (Real Time Motion over Ethernet) to provide fast communication and accurate axis synchronization
• Three System Integration ports are available to fit additional fieldbus, position feedback and I/O options

Conform to safety standards, maximize uptime and reduce costs by integrating directly with safety systems

• M700 has an integrated Safe Torque Off (STO) input and can accommodate an SI-Safety module for safe motion functions