Jual Hitachi Inverter WJ200 Series

Dirancang untuk kinerja yang sangat baik dan sangat mudah untuk digunakan.

1-phase 100V	0.4kW, 0.75kW
1-phase 200V	0.1 - 2.2kW
3-phase 200V	0.1 - 15kW
3-phase 400V	0.4 - 15kW

Models WJ200 Series

1 phase 100V

• WJ200-004M
• WJ200-007M

1 phase 200V

• WJ200-001SF(0.1 kW)
• WJ200-002SF(0.2 kW)
• WJ200-004SF(0.4 kW)
• WJ200-007SF(0.75 kW)
• Wj200-015SF(1.5 kW)
• WJ200-022SF(2.2 kW)

3 Phase 200V

• WJ200-001LF(3-phase 200V 0.1 kW)
• WJ200-002LF(3-phase 200V 0.2 kW)
• WJ200-004LF(3-phase 200V 0.4 kW)
• WJ200-007LF(3-phase 200V 0.75 kW)
• WJ200-015LF(3-phase 200V 1.5 kW)
• WJ200-022LF(3-phase 200V 2.2 kW)
• WJ200-037LF(3-phase 200V 3.7 kW)
• WJ200-055LF(3-phase 200V 5.5 kW)
• WJ200-075LF(3-phase 200V 7.5 kW)
• WJ200-110LF(3-phase 200V 11 kW)
• WJ200-150LF(3-phase 200V 15 kW)

3 phase 400V

• WJ200-004HF(3-phase 400V 0.4kW)
• WJ200-007HF(3-phase 400V 0.75kW)
• Wj200-015HF(3-phase 400V 1.5kW)
• WJ200-022HF(3-phase 400V 2.2kW
• WJ200-030HF(3-phase 400V 3kW)
• WJ200-040HF(3-phase 400V 4kW)
• WJ200-055HF(3-phase 400V 5.5kW)
• WJ200-075HF(3-phase 400V 7.5kW)
• WJ200-110HF(3-phase 400V 11kW)
• WJ200-150HF(3-phase 400V 15kW)

Fungsi auto-tuning yang terintegrasi untuk sensor pengendalian vektor dengan mudah didapatkan torsi tinggi cocok untuk aplikasi yang memerlukan torsi tinggi seperti crane hoists, lift, elevator, dll.
Auto-tuning untuk melakukan kontrol vektor tanpa sensor sekarang dapat dengan mudah dilakukan.

• High starting torque and dramatically improved speed stability thanks to advanced sensorless vector control
• Simplified autotuning procedure
• Easy setup and operation via standard integral keypad, optional enhanced keypad or via PC software
• Dynamic braking transistor in all models
• EasySequence (EzSQ) PLC-like functionality built in
• Simple position control capability
• Capable of driving permanent magnet as well as standard induction motors
• Dual rated for CT/VT applications
• New and more effective trip avoidance functions, safe-stop function and much more…

Hitachi Inverter WJ200 Series dapat dengan mudah dioperasikan dengan operator digital yang disediakan sebagai standar.

(1)	POWER LED	Turns ON (Green) while the inverter is powered up.to the drive is ON.
(2)	ALARM LED	Turns ON (Red) when the inverter trips.
(3)	Program LED>	Turns ON (Green) when the display shows changeable parameter.
(4)	RUN LED	Turns ON (Green) when the inverter is driving the motor.
(5)	Monitor LED [Hz]	Turns ON (Green) when the displayed data is frequency related.
(6)	Monitor LED [A]	Turns ON (Green) when the displayed data is current related.
(7)	Run command LED	Turns ON (Green) when a Run command is set to the operator. (Run key is effective.)
(8)	7-seg LED	Shows each parameter, monitors etc.
(9)	RUN key	Makes inverter run.
(10)	Stop/reset key	Makes inverter decelerates to a stop.
(11)	Escape key	Go to the top of next function group, when a function mode is shown
(12)	Up key	Press up or down to sequence through parameters and functions shown on the display, and increment/decrement values.
(13)	Down key
(14)	Set key	Function code: It moves to the data display. Data code: Press to write the new value to the EEPROM.
(15)	USB connector	Connect USB connector (mini-B) for using PC communication
(16)	RJ45 onnector	Connect RJ45 jack for remote operator