Module Praktik Robot Industri

 

Digunakan untuk pelatihan lengan robot pada industri a. Robot : Scara Robots

i. Panjang Lengan : sekitar 400 mm
ii. Payload : Max 3 kg, rated 1 kg
iii. power requirements : AC 100-240 V
iv. Maksimum kecepatan operasi : sekitar 1000 mm/sec

b. PLC
c. Sistem Gripper

i. Gripper : Module gripper set

ii. Finger : Costum finger, material Aluminium /SUS 304 d. Booth : Booth dengan material Aluminium profile
e. Sistem pneumatic
f. Sistem elektrik:

i. Panel box "lokal” ii. Sensor
iii Accesories

g. Laptop dengan dilengkapi software asli i. Sistem operasi
ii software robot
iii software PLC

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Modular Product System

Ÿ Digunakan untuk pembelajaran mengenai rangkaian sistim pengaturan dan komunikasi PLC peralatan otomasi industri secara riil dan lengkap

Ÿ Air service (1 pcs), Mini cylinder (1pcs),

Swing cylinder (1 pcs), Solenoid valve (3 pcs), Vacuum generator ( 1 pcs), Vacuum chuck (1 pcs), Fiber optic sensor ( 2 pcs), Magnetic switch ( 2 pcs), PLC unit (1 pcs),Ÿ Touch panel unit ( 1 pcs), Control panel (1 pcs), Station size (1 pcs);

Ÿ 2. Testing station :

Ÿ Biaxial cylinder PLC unit Control, Panel

Platform body (1 pcs), Workpiece detection device ( 1 pcs), Pusher cylinder device (1 pcs), Solenoid valve (4 pcs), Magnetic switch (6 pcs), Capacitive sensor (1 pcs), Photoelectric sensors (1 pcs), Inductive sensors (1 pcs), Detection sensor, PLC unit (1 pcs), Control panel (1 pcs), Station size (1 pcs);

3. Processing Station

Biaxial cylinder (1 pcs), Chute, Servo controller (1 pcs), Servo motor (1 pcs), Drilling cylinder lifting device(1 pcs), Drilling Motor (1 pcs), Pushing gas cylinder, Clamp cylinder (1 pcs), Detection, cylinder (1 pcs), Slider (1 pcs), Solenoid valve, Photoelectric sensors (1 pcs), Inductive sensors (1 pcs), Magnetic switch (5 pcs), PLC unit (1 pcs), Control panel (1 pcs), Station size (1 pcs);

4. Handling station

Boom cylinder (1 pcs), Swing cylinders (1 pcs), Arm cylinder (1 pcs), Waste tank (1 pcs) , Vacuum generator (1 pcs), Vacuum chuck (1 pcs), Solenoid valve (4 pcs), Magnetic switch (6 pcs), PLC unit (1 pcs), Control Panel (1 pcs), Platform body (1 pcs);
5. Sorting and storage station Protruding cylinder (1 pcs), Gas finger (1 pcs), Servo controller (2 pcs), Servo motor (2 pcs),
Solenoid valve (2 pcs), Fiber optic sensor and amplifier (2 pcs), Magnetic switch (4 pcs), PLC unit (1 pcs), Control Panel (1 pcs), Platform body (1 pcs).

Ÿ Part list:

Ÿ 1. Distribution station :

Ÿ 1. Input Power: Single phase ~ 220V ± 10% 50Hz

Ÿ 2. Leakage protection: I 0.1S
n ≤ 30mA, t ≤

Ÿ 3. AC220V AC power

Ÿ 4. 24 V DC power output

Ÿ 5. Accident emergency stop button, power

indicator, power indication

Ÿ 6. Power off misuse power protection

Ÿ 7. Installed capacity: ≤ 5kVA

Ÿ 8. Operation compressed air: 5 ~ 6bar

Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hydraulic & Pneumatic System Integration Trainer

 

• Ÿ  untuk mempelajari kombinasi pneumatik dan hidrolik industri yang dikontrol oleh PLC

• Ÿ  Outputvoltage380V/220V,DC

• Ÿ  voltage24V.Thesupplyvoltage:

• Ÿ  three-phasefive-wireAC380V±

• Ÿ  5%,50Hz;controlvoltage:DC24V/+12V;

• Ÿ  Machinecapacity:≤1kVA;

  Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Hydraulic 4 Trainer Controlled By PLC

 

0. Ÿ Untuk mempelajari dasar dasar hidrolika industri yang sudah dikontrol oleh PLC
   Ÿ The supply voltage: three-phase
   Ÿ five-wire AC 380 V ± 5%, 50Hz;

   Ÿ control voltage: DC 24V / +12 V; Ÿ Machine capacity: ≤ 1 kVA;

   Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Pneumatic Trainer Controlled By PLC

 

0. Ÿ Untuk mempelajari dasar dasar pneumatic industri yang sudah di kontrol oleh PLC
   Ÿ The supply voltage: three-phase five-wire AC 380 V ± 5%, 50Hz;

   Ÿ control voltage DC 24V / +12 V; Ÿ Machine capacity: ≤. 1 kVA;

   Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Motor & Electrical Control Trainer

 

• Ÿ  Untuk mempelajari cara kerja motor listrik dan kinerjanya sebagai mesin utama di industri

• Ÿ  1. Working power: three-phase five-wire AC 380V±10% 50Hz;

• Ÿ  2.Overallpowerconsumption:≤.1.5KW;

• Ÿ  3. Safety protections: grounded, lead protection,

  using insulated safety sockets

  Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831

Servo Motor Trainer

 

0. Ÿ Digunakan untuk menjelaskan karakteristik dan pemasangan motor servo

   • Ÿ  AC Power: Single phase AC220V ± 10% 50Hz

   • Ÿ  Air pressure: 0.4 MPa to 0.6 MPa

   • Ÿ  Drive Type: AC 220V, approx. 400W servo motor

   • Ÿ  Part list:

   • Ÿ  PLC module, the operation button module, the servo drive module, pneumatic module, various sensors, and other components, according to the training needs for flexible combination of modules. Manual book, Experiment module.

     Untuk informasi detail silahkan hubungi no HP / Whatsapp : 081212269831