PLC Delta DVP-PM Series Expansion Module

Digital modules (output/input/mix), analog modules (output/input/mix), temperature measurement modules, network modules.

Applications :
Used for 2-axis servo positioning control, material cutting machine (high-speed servo control), crane operations, material clipper controlled by the servo.

Specifications :

• MPU points: 16
• Max. I/O points: 512
• Program capacity: 64K Steps
• Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
• Data register: 10,000 words (latched)
• 500KHz high-speed pulse output:
• Built-in 2 groups of A/B phase differential signal ouput
• X-axis pulse output: (FP0+, FP0-), (RP0+, RP0-)
• Y-axis pulse output: (FP1+, FP1-), (RP1+, RP1-)
• Supports Manual Pulse Generator (MPG) and multi-point external signal inputs

PLC Delta DVP-MC Series Expansion Module

Features & Benefits :

Digital modules (output/input/mix), analog modules (output/input/mix), temperature measurement/control modules, load cell modules, network modules, remote I/O communication modules

Applications :

Remote device monitoring, production line monitoring, building automation, printing machine, container filler (recipe application)

Specifications :

• Digital modules (output/input/mix): 8 ,16 , 32, 64 I/O
• Analog modules (output/input/mix): 2 channel, 4 channel, 6 channel inputs (14-bit) / output (12-bit)
• Load cell modules: independent dual-channel high speed high accuracy load cell module with 24 bits resolution with 2.5ms response rate
• Temperature measurement modules: conversion time 200ms/channel, overall accuracy+/-0.6%, resolution 16bits, RTD inputs: Pt100 / Pt1000 3850 PPM/°C (DIN 43760 JIS C1604-1989) / Ni100 / Ni1000 / LG-Ni1000 / Cu100 / Cu50, thermocouple inputs: J, K, R, S, T type
• Network modules: EtherNet, DeviceNet, PROFIBUS-DP, CANopen, RS-485, RS-422, BACnet MS/TP
• Remote I/O communication modules: DeviceNet, PROFIBUS, EtherNet, RS-485

PLC Delta DVP-EX Series

The EX series is the analog MPU with the lowest cost. Apart from supporting digital input and output, the EX series has built-in multiple analog I/O channels and integrates a variety of communication protocol’s for constructing a complete control network. EX series is suitable for all kinds of small PLC applications.

Applications :
USED for packaging machine, spinning machine, conveyer belt (rotation speed control), winding machine (tension control), food processing machine, landscape fountain.

Specifications :

• MPU points: 20 (8DI/6DO, 4AI/2AO)
• Max. I/O points: 238
• Program capacity: 4K Steps
• Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
• High-speed pulse output: Supports 2-point (Y0, Y1) independent high-speed pulse output of up to 10KHz.
• Built-in 4-point high-speed counter

• Built-in analog I/O function

PLC Delta DVP-ES2/EX2 Series Expansion Module

Features & Benefits :

Digital modules (output/input/mix), analog modules (output/input/mix), temperature measurement modules, resolver modules

Applications :

HVAC, printing machine, packaging machine, molding injection machine, inspection system

Specifications :

• Digital modules (output/input/mix): 8,16, 32(AC power)
• Analog modules (output/input/mix): 4 channel, 6 channel inputs (14-bit)
• Temperature measurement modules: conversion time 200ms/channel, overall accuracy +/-0.6%, resolution RTD inputs Pt100 / Pt1000 / Ni100 / Ni1000, thermocouple inputs J, K, R, S, T, E, N type
• Resolver modules: distance 50M, resolution 12-bits, 500rpm, disconnection detection is supported

PLC Delta DVP-ES2/EX2 Series

ES2 series is a small PLC for basic sequential control. It is economical, highly efficient and functional.

Applications :
HVAC, molding injection machine, big storage management, packaging machine, precise textile machine, logistic system

Specifications :

• MPU points: 16 / 20 / 24 / 32 / 40 / 60
• Program capacity: 16k steps
• Built-in with 3 COM ports: 1 RS-232 port and 2 RS-485 ports, all are able to operate independently (Master/Slave)
• Max. I/O points: 256 input points + 16 output points, or 256 output points + 16 input points
• DVP-EX2 MPU is built in with 12-bit 4AD/2DA and offers analog/temperature modules of 14-bit resolution.
• Built-in with 8 high-speed input points (2 points for 100kHz, 6 points for 10kHz) and supports U/D, U/D Dir, A/B counting modes
• New motion control instructions: Close loop control, alignment mark, shield, immediate variable speed, S-Curve acceleration/deceleration
• Application in emerging industry: Exclusive instructions and function blocks designed for PV solar tracker
• Handy instructions for frequency inverter: For controlling the forward running, reverse running, RUN and STOP of Delta@@s AC motor drives
• Password protection: Password for subroutine, user ID, restriction on trial times
• Highly efficient instruction efficient instruction execution

PLC Delta DVP-ES Series

ES series is the representative MPU for basic sequential control as well as the most cost-effective small PLC.

Applications :
Spinning machine, elevator control, packaging machine, material feeder, capacitor leg cutting machine, food processing machine, landscape fountain.

• Specifications :
  MPU points: 14 / 24 / 32 / 40 / 60
• Max. I/O points: 256
• Program capacity: 4K Steps
• Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
• High-speed pulse output: Supports 2-point (Y0, Y1) independent high-speed pulse output of up to 10KHz.
• Built-in 4-point high-speed counter

PLC Delta DVP-EH3 Series

The new generation DVP-EH3 PLC is the high-end model of the Delta DVP-E series.

It provides larger program capacity and data registers for more demanding and complex applications.

Applications :
High-speed 3-axis servo welding machine, high-speed cutting machine, bar feeder, distributed monitor system in production line.

Features & Benefits :

Specifications :
Excellent Motion Control

• High-speed pulse output: 4 sets of 200kHz pulse output (DVP40/48/64/80EH00T3)
• Supports max. 4 hardware 200kHz high-speed counters
• Increases many motion control instructions to meet the applications that require high-speed and high-precision
• positioning control such as labeling machines, packaging machines and printing machines
• Offers linear / arc interpolation motion control
• Provides up to 16 external interrupt pointers

Complete Program Protection

• Auto backup function to prevent losing programs and data even when the battery runs out
• Second copy function provides a backup for extra insurance in the event that one set of programs and data are damaged
• Up to 4-level password protection protects your source programs and intellectual property

Outstanding Operation Performance

• CPU + ASIC dual processors support floating point operations.
• The max. execution speed of basic instructions is able to reach 0.24μs.

Flexible Function Extension Modules & Cards

• The multiple selections of extension modules and function cards provide analog I/O, temperature measurement, additional single-axis motion control, high-speed counting, 3rd serial communication port and Ethernet communication card are available.

PLC-Link

• C-Link allows the user to link up a max. 32 units to the network without having to install extra communication extension modules.

Brand-New High-Speed Extension Modules

• The brand-new extension modules greatly shorten the data transmission time among the PLC and its extension modules as well as enhance the efficiency of the PLC program.