Electro-Pneumatic Trainer

Alat latih ini dirancang untuk mengenalkan, membiasakan, dan mengerti teknologi pneumatik dan pneumatik elekro. Semua komponen pneumatik terpasang pada panel, hal ini untuk menghindari kehilangan maupun kesalahan penempatan item dan mengurangi waktu persiapan di dalam kelas. Dilengkapi dengan tiga interchangeable modul (ends of stroke, sliding door, feeder-stamper-sorter) yang memungkinkan pengguna memulai contoh aplikasi nyata menggunakan teknologi pneumatik dan pneumatik listrik.

Topik percobaan:

• Basic Pneumatic & Electro-pneumatic System
• Direct Control Of a Single Acting Cylinder
• Indirect Control Of a Single Acting Cylinder
• Indirect Control Of a Double Acting Cylinder
• Control Of a Double Acting Cylinder With Double Valve
• Control Of a Double Acting Cylinder From Two Independent Locations
• Control Of a Double Acting Cylinder From Two Simultaneous Locations
• Memory Function With a Single Valve
• Detection And Control Of the Cylinder Position
• Activation Of a Control Signal According to Pressure
• Speed Adjustment in a Double Acting Cylinder
• Single Control Of a Single Acting Cylinder With a Single Solenoid Valve
• Control Of a Single Acting Cylinder With a Double Solenoid Valve
• Single Control Of a Double Acting Cylinder With a Single Solenoid Valve
• Control Of a Double Acting Cylinder With a Double Solenoid Valve
• Control With a Single Solenoid Valve With Double Effect (Memory)
• Detection And Control Of a Double Acting Cylinder Position With Mechanical Ends Of Stroke
• Detection And Control Of a Double Acting Cylinder Position With Auto Switches
• Pneumatic Actuation Of a Door Using a Double Acting Cylinder
• Electro-pneumatic Actuation Of a Door Using Two Push-buttons
• Feeding Of Part From a Vertical Warehouse
• Feeding Of Parts from a Vertical Warehouse With Detection Of Presence Of Parts
• Feeding Of Parts From a Vertical Warehouse With Ejection Of Parts
• Pneumatic Press With Safety Actuation (With Two Push-buttons)
• Feeding Of Parts From a Vertical Warehouse With Ejection of Parts
• Stamper By Means Of a Double Acting Cylinder
• Stamper By Means Of a Double Acting Cylinder With Vertical Warehouse And Part Feeder
• Stamper By Means Of a Double Acting Cylinder With Vertical Warehouse, Part Feeder And Ejection Mechanism and Sorting Mechanism

Three Phase Synchronous and DC Machine

Alat latih ini dirancang untuk mempelajari dan praktik prinsip kerja mesin tiga fasa synchronous dan mesin DC Compound sebagai motor dan generator. Dilengkapi dengan Digital Power Meter untuk pengukuran nilai-nilai elektrikal. Mesin-mesin terhubung menggunakan kopling.

Topik percobaan:

• Characteristics of three phase synchronous motor
• The Characteristics of n, I, cos σ, P2, η = f (M) Load of the Three Phase Synchronous Motor
• The Characteristics of IE, n, η, I, P2, = f (M) Load with cos σ =1 Constant of the Three Phase Synchronous Motor
• I = f (IE) V Curve Characteristic of the Three Phase Synchronous Motor
• Three Phase Synchronous Motor as the Three Phase Generator
• Synchronization
• Characteristics of Three Phase Generator of Without Load and Short-circuit
• Characteristics of RLC Load of Three Phase Generator
• Start Characteristic and Rotation Direction Changing of the DC Series Motor
• Setting the Speed of DC Series Motor
• Characteristics of n, IA, P2, η = f(M) Load of DC Series Motor
• Start Characteristic and Rotation Direction Changing of the DC Shunt Motor
• The Characteristics of n, IA, P2, η = f (M) Load of DC Shunt Motor
• Characteristics of Excitation Current and Speed n = f(IE) of DC Shunt Motor
• Characteristics of Voltage and Speed n = f(V) of DC Shunt Motor
• Characteristics Torque and Speed n = F(M) Of The DC Shunt Motor
• Characteristics of Torque and Speed n = f(M) of DC Shunt Motor with Armature Equipped by Rheostat Resistance
• Start Characteristic and Rotation Direction Changing of the DC Compound Motor
• Characteristics of n, Ia, P2, ᶯ = F (M) Load of DC Compound Motor
• Characteristics of the Zero Load and Loaded Separately Excited DC Generators
• Series Connection of DC Generator
• Shunt Connection of DC Generator
• Lompound Connection of DC Generator

Transformer Trainer

Alat latih ini dirancang untuk mengajar konsep transformator fasa tunggal maupun tiga phasa. Siswa akan mempelajari karakteristik transformator. Panel dilengkapi dengan simbol dan data teksnis dan dilengkapi dengan Digital Power Meter, peralatan dasar pengukuran untuk transformer. Semua konektor dan plug dilengkapi pengaman.

Topik percobaan:

• Voltage Transformation in Single Phase Transformer El Core
• Current Transformation in Single Phase Transformer El Core
• Single Phase Transformation at No-load and Short Circuit for El and Torodial Core
• Loading of El and Torodial Core a Single Phase Transformer
• Efficiency of EI and Toroidal Core a single phase transformers
• Operating characteristic of single phase auto-transformer
• Three phase transformer Yy0 - Yyn0 Connection at No-Load
• Three phase transformer Yy0 - Yyn0 Connection with unbalanced Load
• Three phase transformer Dy5 - Yyn5 Connection at No-Load
• Three phase transformer Dy5 - Yyn5 Connection with unbalanced Load
• Three phase transformer Yd5 - Ydn5 Connection at No-Load
• Three phase transformer Yd5 - Ydn5 Connection with unbalanced Load
• Three phase transformer Yz5 - Yzn5 Connection at No-Load
• Three phase transformer Yz5 - Yzn5 Connection with unbalanced Load

Spesifikasi Teknis

- Generator + wind turbin

- Electro motor penggerak Blower

-Inverter AC 1 Phase ke 3 Phase

- Power Source AC 3 Phase

-Potensio (SPEED)

-Switch

-Konektor CB 2 pin

-Konektor CB 3 pin

-Voltmeter Analog 30 Volt

-Ampere meter Analog 20A

-Voltmeter Digital

-Frekuensi Meter Digital 

-Anemometer

-Aki 12 VDC

-Saklar ganda

-Saklar tunggal

-Stop Kontak

-Lampu TL

-Lampu Pijar

-RPM Meter

-Charge Controller

Kelengkapan

-Modul pembelajaran

-Kabel Jumper 10 pasang (10 merah,10 hitam)

-kabel power 1 fasa

-blower penggerak wind  turbine

Asynchronous Machine Trainer

Alat latih ini dirancang untuk mengajar konsep dasar Mesin AC asynchronous, fasa tunggal maupun tiga fasa. Siswa akan mempelajari karakteristik Mesin AC asynchronous. Dilengkapi dengan alat ukur untuk mesin listrik (Torque, Speed, Voltage, Current, Power dan Frequency). Mesin-mesin dapat dihubungkan menggunakan sistem kopling.

Topik percobaan:

• Starting characteristic of a single phase capacitor AC machine
• Changing the rotational directional of a single phase AC machine
• Load characteristic n, I, cosσ, Ihi, P2, s, η = f(M) of a single-phase induction machine
• Starting characteristic of three-phase induction machine with squirrel-cage rotor
• Changing the rotational directional of three-phase induction machine with squirrel-cage rotor
• Compensation of reactive power of three-phase induction machine with squirrel-cage rotor
• Load Characteristic n, I, Iu, Iv, Iw cosσ = f(M) of Three-phase induction machine with squirrelcage rotor-Steinmetz circuit
• Load Characteristic n, I, Iu, Iv, Iw cosσ = f(M) of Three-phase induction machine with squirrelcage rotor
• Starting characteristic of three-phase Induction machine with slip-ring rotor
• Changing the rotational directional of threephase induction machine with slip-ring rotor
• Load characteristic n, I, cosσ, P2, η, s = f (M) of three-phase induction machine with slip-ring rotor
• Rotational-frequency characteristics n = f (Rv) of Three-phase induction machine with slip-ring rotor
• Pole changeable (dahlander circuit) connection and change rotation of threephase induction machine with squirrelcage rotor
• Load characteristics n, I, cos σ, P2, s, η = f (M) Three-phase induction machine with squirrel-cage rotor, pole changeable (dahlander circuit)

Electrical Machine Trainer

Alat latih ini dirancang untuk mempelajari bagaimana menjalankan brake dan reverse rotation motor AC maupun DC. Motor listrik yang digunakan adalah motor DC compound, motor kapasitor 1 fasa, motor squirrel cage 3 fasa, motor slip ring 3 fasa dan motor synchronous 3 fasa dan dilengkapi dengan modul-modul pendukung lainnya. Semua kabel dan terminal input dan output menggunakan safety connector.

Fitur:

• Memiliki lemari untuk penyimpanan modul
• Sistem power supply terisolasi dengan sumber dari luar (PLN)
• Tegangan motor disesuaikan dengan standar IEC 60038
• Meter-meter digital sama dengan yang digunakan pada dunia industri

Topik percobaan:

• Starting DC Motor by Using Variabel Resistance System
• Starting 1 Phase Capacitor Motor or 3 Phase Squirrel Cage Motor by Autortransformer
• Starting 3 Phase Squirrel Cage Motor by Star-Delta System
• Starting 3 Phase Slip-Ring Motor by Using Variabel Resistance on the Rotor
• Starting the 3 Phase Synchronous Motor
• Dynamic Braking of The 3 Phase Squirrel Cage Motor
• Dynamic Braking of The DC Motor
• Plugging Braking of 3 Phase Squirrel Cage Motor
• Reversing The Motor Rotation of 3 Phase Squirrel Cage Motor
• Sequence Control Circuit of The 3 Phase Squirrel Cage Motor
• Control Motor with Two of Them is "On" and One of Them is "Off"
• Measuring the Resistance Value of 3 Phase Squirrel Cage Motor After Started and Loaded

Advanced PLC Trainer with HMI

Advanced PLC Trainer with HMI dirancang untuk kemudahan pengajaran dan belajar untuk mengembangkan kemahiran dalam sistem otomatisasi industri. Model dan simulasi yang disertakan, menjadikan tujuan pembelajaran cepat tercapai dan sederhana.

Modul ekspansi digital disertakan untuk memperluas output digital begitu juga modul ekspansi input/output analog disertakan untuk interfacing analog ke digital dan sebaliknya. Human Machine Interface (HMI) memvisualisasikan informasi dari proses pada plant.

Jenis konstruksi panel memungkinkan para siswa melakukan eksperimen mereka dengan mudah. Siswa dapat belajar secara modular. Semua input dan output terminal menggunakan soket dan plug 4mm berpelindung.

Dilengkapi dengan buku panduan percobaan.

Topik percobaan:

• Pengenalan PLC
• Pemrograman Dasar
• Instruksi Output
• Instruksi Logika
• Instruksi Waktu
• Instruksi Pencacah
• Simulasi Menjalankan Motor dengan Kontaktor
• Aplikasi PLC dalam Kontrol Traffic Light
• Digital Outputs Expansion Module 8ET1
• Analog Inputs/Outputs Expansion Module MAD01
• HMI

Refrigeration and Heat Pump Trainer with Data Acquisition

Refrigeration and Heat Pump Trainer dirancang sebagai alat bantu mengajar dalam pendinginan dan panas sistem pompa dasar dengan komponen katup pembalik 4 arah yang memungkinkan modus sirkulasi yang dapat berubah arah, modus pendinginan dan modus pemanasan. Alat ini juga dilengkapi dengan katup ekspansi dan tabung kapiler berbagai ukuran panjang untuk menunjukkan pada siswa komponen ekspansi yang berbeda. Modul Data Acquisition disertakan untuk kemudahan pengumpulan dan pemrosesan data pada percobaan yang dilaksanakan.

Evaporator dan kondensor dilengkapi dengan pipa transparan yang memungkinkan siswa dapat langsung mengamati transisi fase refrigeran, juga dilengkapi dengan kontrol kecepatan kipas untuk mengatur laju aliran udara.

Instalasi alat dipasang pada meja dan panel dengan rangka yang kuat.

Dilengkapi dengan buku panduan percobaan.

Topik percobaan:

• Siklus Refrigerasi Dasar
• Heat Pump System dengan 4-Way Reversing Valve
• Representasi Heat Pump pada Diagram P-H
• Kesetimbangan Energi pada Heat Pump
• Koefisien Performansi (COP) Heat Pump
• Komparasi Pipa Kapiler dengan Katup Ekspansi Termostatik (TXV)