Jual Servo Amplifier Mitsubishi MR-J3-10A

Servo Amplifier Mitsubishi MR-J3-10A

Mitsubishi MR-J3-10A 12 bulan Garansi Industri Utara Diuji sepenuhnya fungsional, dibersihkan dan reset pabrik (jika perlu) Diperbaharui secara profesional Item-item yang diperbaharui mungkin memiliki cacat kosmetik kecil dan tidak disertakan dengan kemasan atau aksesori asli. Persediaan terbatas dan tergantung pada penjualan sebelumnya 100W Servo Amplifier Digital atau Kontrol Analog 200V Single atau 3Ph) Tentang Pabrikan Ringkas, tepat, dan mudah digunakan adalah cara Mitsubishi menggambarkan seri MR-J3 mereka dan di Northern Industrial, kami setuju. MR-J3 adalah serangkaian drive servo yang tersedia dalam tiga versi, MR-J3-A, MR-J3-B dan MR-J3-T. MR-J3-A adalah untuk drive konvensional dengan tugas seperti mengatur kecepatan, torsi dan posisi. Amplifier servo MR-J3-B paling cocok untuk urutan pergerakan multi-sumbu yang kompleks, sedangkan MR-J3-T adalah drive servo dengan pemosisian bawaan. Drive servo Mitsubishi mana pun yang paling cocok untuk aplikasi Anda, Anda dapat memastikan kualitas tinggi dan konfigurasi yang mudah. Seri ini juga 40% lebih ramping dari rentang sebelumnya

Jual Servo Amplifier MITSUBISHI MR-J2S-350B

Servo Amplifier MITSUBISHI MR-J2S-350B

Spesification

Voltage, Frequency	Single phase AC 200 ~ 230V / 50, 60Hz
Allowable voltage fluctuation	Single phase AC170 ~ 253V
Allowable frequency variation	Within ± 5%
Input (W)	50
Main circuit power	Voltage, Frequency (Note 1)	Three phase AC 200 ~ 230V / 50, 60Hz (Note 2)
	Allowable voltage fluctuation	Three phase AC 200 to 230 V: Three phase AC 170 to 253 V
	Allowable frequency variation	Within ± 5%
	Power supply capacity
	Inrush current
Control method		Sinusoidal PWM control · Current control method
Dynamic brake		Built-in (Note 3)
Protection function		Over current shutdown , regeneration overvoltage shutdown, overload shutdown (electronic thermal), servo motor overheat protection, detector fault protection, regeneration fault protection, undervoltage, instantaneous power failure protection, overspeed protection,
Maximum command input during position control		Equivalent to 10Mpps
rescue		Forced cooling , open (IP00)
Environment	Main Temperature	0 to 55 ° C (not to be frozen), Storage: -20 to 65 ° C (not to be frozen)
	Weekly humidity	90% RH or less (No condensation), Conservation: 90% RH or less (No condensation)
	atmosphere	Indoors (no direct sunlight), corrosive gas, flammable gas, oil mist, dust free
	Elevation / Vibration	Less than 1000m above sea level / 5.9m / s2 or below
Weight (kg)		2.0

Jual Servo Amplifier MITSUBISHI MR-J2S-350A

Servo Amplifier MITSUBISHI MR-J2S-350A

Spesification

Produsen                                  : Mitsubishi Electric

Nomor model                            : MR-J2-350A atau MRJ2350A atau MR-J2-35OA

Nama Produk                           : Penguat servo 16 amp 3ph 200-230VAC 50 / 60HZ 3.5KW

Power Supply                           : 3-phase 200-230VAC, 50 / 60Hz

Keterangan                               : MR-J2-350A adalah Servo Drive-AC yang diproduksi oleh Mitsubishi

Tipe Drive                                 : MR-J2 AC Servo Amplifier / Drive

Interface                                   : General Purpose Interface

Masukan                                  : 16A 3PH 200-230vAC 50 / 60Hz

Output                                      : 17A 170v 0-360Hz

Rentang Produk                       : MELSERVO MR-J2 Series

Sistem Kontrol                         : Kontrol PWM sinusoidal / sistem kontrol arus

Rem dinamis                            : Built-in

Respon frekuensi kecepatan   : 550 Hz atau lebih

Berat Pengiriman                     : 3,5 kg

Jual Servo Amplifier MITSUBISHI MR-J2S-200B

Servo Amplifier MITSUBISHI MR-J2S-200B

Spesification

• Power Supply (Voltage/frequency): 3-phase 200-230VAC, 50/60Hz
• Power Supply (Permissible voltage fluctuation): 3-phase 170-253VAC
• Power Supply (Permissible frequency fluctuation): ±5%
• Control System: Sinusoidal PWM control/current control system
• Dynamic brake: Built-in
• Speed frequency response: 550 Hz or more
• Protective functions: Overcurrent shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal), servomotor overheat protection, encoder fault protection, regeneration fault protection, undervoltage/sudden power outage protection,overspeed protection, excess error protection
• Structure: Fan-cooling, open (IP00)
• Ambient temperature: Operation:0-55°C (no freezing), Storage: -20-65°C (no freezing)
• Ambient humidity: Operation:90% RH max. (no condensation), Storage:90% RH max. (no condensation) 
• Atmosphere: Inside control panel; no corrossive gas, no flammable gas, no oil mist, no dust
• Elevation: 1000m or less above sea level
• oscillation: 5.9 m/s max.
• Shipping Weight: 2.5 kg

Jual Servo Amplifier MITSUBISHI MR-J2S-200A

Servo Amplifier MITSUBISHI MR-J2S-200A

Spesification

• Power Supply (Voltage/frequency): 3-phase 200-230VAC, 50/60Hz
• Power Supply (Permissible voltage fluctuation): 3-phase 170-253VAC
• Power Supply (Permissible frequency fluctuation): ±5%
• Control System: Sinusoidal PWM control/current control system
• Dynamic brake: Built-in
• Speed frequency response: 550 Hz or more
• Protective functions: Overcurrent shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal), servomotor overheat protection, encoder fault protection, regeneration fault protection, undervoltage/sudden power outage protection,overspeed protection, excess error protection
• Maximum input pulse frequency (Position control mode): 500 kpps- when using differential receiver, 200 kpps- when using open collector
• Positioning feedback pulse (Position control mode): Resolution per encoder/servo motor rotation (131072 pulse/revolution)
• Positioning complete width setting (Position control mode): 0 - ±10VDC
• Excess error (Position control mode): ±10 rotations
• Torque limit input (Position control mode): Set by parameters or external analog input (0-±10VDC / maximum torque)
• Speed control range (Speed control mode): Analog speed command 1:2000, internal speed command 1:5000
• Analog speed command input (Speed control mode): 0-±10VDC / rated speed
• Speed fluctuation rate (Speed control mode): ±0.01% max.(load fluctuation 0-100%), 0% (power fluctuation ±10%), ±0.2% max. (ambient temperature 25°C ± 10°C), when using external analog speed command
• Torque limit (Speed control mode): Set by parameters or external analog input (0-±10VDC / maximum torque)
• Torque command input (Torque control specifications): 0-±8VDC / maximum torque (input impedance 10 to 12kΩ)
• Speed limit (Torque control specifications): Set by parameters or external analog input (0-±10VDC, rated speed)
• Structure: Fan-cooling, open (IP00) 
• Shipping Weight: 3.1 kg

Jual Servo Amplifier MITSUBISHI MR-J2S-100B

Servo Amplifier MITSUBISHI MR-J2S-100B

Spesification

• Manufacturer : Mitsubishi Electric
• Power Supply (Voltage/frequency): 3-phase 200-230VAC, 50/60Hz
• Power Supply (Permissible voltage fluctuation): 3-phase 170-253VAC
• Power Supply (Permissible frequency fluctuation): ±5%
• Control System: Sinusoidal PWM control/current control system
• Dynamic brake: Built-in
• Speed frequency response: 550 Hz or more
• Protective functions: Overcurrent shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal), servomotor overheat protection, encoder fault protection, regeneration fault protection, undervoltage/sudden power outage protection,overspeed protection, excess error protection
• Structure: Self-cooling, open (IP00)
• Ambient temperature: Operation:0-55°C (no freezing), Storage: -20-65°C (no freezing)
• Ambient humidity: Operation:90% RH max. (no condensation), Storage:90% RH max. (no condensation) 
• Atmosphere: Inside control panel; no corrossive gas, no flammable gas, no oil mist, no dust
• Elevation: 1000m or less above sea level
• oscillation: 5.9 m/s max.
• Shipping Weight: 2.5 Kg

Jual Servo Amplifier MITSUBISHI MR-J2S-100A

Servo Amplifier MITSUBISHI MR-J2S-100A

Spesification
Brand Name	Mitsubishi
Model Number	MR-J2S-100A
Power supply Voltage/frequency	3-phase 200 to 230VAC, 50/60Hz
Control system	Sine-wave PWM control, current control system
Dynamic brake	Built-in
Max. input pulse frequency	500kpps (for differential receiver), 200kpps (for open collector)
Mass (KG)	1.7