MITSUBISHI QD75MH4

Brand: MITSUBISHI 

Name: Corresponding III SSCNET positioning module

Model: QD75MH4

"4 axes, SSCNET III type.

2 axis /4 axis /3 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

40 pin connector.

Through the SSCNET III cable connection to save wiring, the distance between the station up to 50m.

Absolute position system for determining the origin position is supported by the return data set operation.

In addition, the limit switch of the upper limit, the lower limit switch and the near point block signal input can be directly connected to the servo amplifier,

Thus greatly reducing the wiring requirements.

Easy to achieve high speed, high precision positioning control.

Support for multiple types of positioning control,

Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..

In addition, can use the "Configurator-QP GX" and other software,

Easy to set, monitor and debug. "

Input / output points: 4096 points.

You can use the CF card.

Version OS:VxWorks 5.4.

Simply insert the SD memory card, you can automatically record.

Simply insert the SD in the CPU to save the record setting file, you can automatically start recording.

Even when remote data collection is required,

After receiving a record setting file by mail and copy it to the SD memory card,

Can immediately start recording MITSUBISHI QD75MH4 

Automatically transfer the record file to the FTP server

Simply by recording the configuration tool to carry out a simple setup,

A data record file stored on the SD memory card can be sent to the FTP server.

Because the record server can handle multiple files, it can reduce the task of management and maintenance MITSUBISHI QD75MH4. 

When a failure occurs, it can quickly respond to.

Simply extract the data associated with the problem, do not have to spend a lot of time to filter a large number of diagnostic data,

So it can quickly determine the cause of the failure, and make the solution.Specification model: Q20UDHCPU.

Input / output points: 4096 points.

Number of input and output elements: 8192 MITSUBISHI QD75MH4. 

Program capacity: 200 K step.

Processing speed: 0.0095 s.

Program memory capacity: 800 KB.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU.

High speed and high precision data processing.

The processing speed of the real number (floating point) arithmetic has been greatly improved,

Addition instruction reached 0 MITSUBISHI Corresponding III SSCNET positioning module. 014 mu s,

Therefore, it can support the request of high-speed, high-precision processing data processing MITSUBISHI Corresponding III SSCNET positioning module. 

In addition, the new addition of double precision floating point arithmetic instructions,

Simplify the programming, reduces the computational error when executing complex formula.

Shorten the fixed scan interrupt time, high precision device MITSUBISHI Corresponding III SSCNET positioning module. 

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.ABS serial synchronous encoder input can be used: 2 sets of modules / units.

Position detection method: compiled on value (ABS) method.

Transmission mode: serial communication.

Allows you to track target input points: 2.

Automatically transfer the record file to the FTP server

Simply by recording the configuration tool to carry out a simple setup,

A data record file stored on the SD memory card can be sent to thhe FTP server QD75MH4. 

Because the record server can handle multiple files, it can reduce the task of management and maintenance.

When a failure occurs, it can quickly respond to.

Simply extract the data associated with the problem, do noot have to spend a lot of time to filter a large number of diagnostic data,

So it can quickly determine the cause of the failure, and make the solution MITSUBISHI QD75MH4. 

MITSUBISHI QD75M4

Brand: MITSUBISHI 

Name: Corresponding SSCNET positioning module

Model: QD75M4

"4 axes, SSCNET connection type.

2 axis /4 axis /3 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

40 pin connector.

Easy to achieve high speed, high precision positioning control.

Support for multiple types of positioning control,

Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..

In addition, can use the "Configurator-QP GX" and other software,

Easy to set, monitor and debug.

Saving wiring through SSCNET cable connections while simultaneously,

The length of the total cable distance up to 30m.

In addition, an absolute position system for determining the origin position is supported by the return data set operation of the origin.

No need for the near point block, such as wiring. "

For 32 point I/O. 0.5 square mm (AWG20).Output points: 32 points.

Output voltage and current: DC5~12V; 16mA/ point; 512mA/ common.

Response time: 0.5ms.

32 points and 1 common ends.

Leaky type.

40 pin connector.

With fuse.

Ultra high speed processing, production time is shortened, better performance MITSUBISHI QD75M4. 

As applications become larger and more complex, it is necessary to shorten the system operation cycle time QD75M4

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias.

Convenient processing of large capacity data MITSUBISHI QD75M4. 

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming MITSUBISHI QD75M4. 

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register MITSUBISHI Corresponding SSCNET positioning module. 

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved MITSUBISHI Corresponding SSCNET positioning module. 

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc MITSUBISHI Corresponding SSCNET positioning module. , can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the datta transceiver time between the CPU module QD75M4. 

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily diisplayed MITSUBISHI QD75M4. 

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

MITSUBISHI QD75D4

Brand: MITSUBISHI 

Name: Differential output positioning module

Model: QD75D4

4 axis, differential drive output type.

2 axis /4 axis /3 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

Maximum pulse output: 1Mpps.

40 pin connector.

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types.

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control.

(the command pulse of the open collector positioning module is highest 200kpps.)

Can also meet the needs of high speed, high precision control.

Most suitable analog modules for high speed conversion control.

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility.

Can meet the inverter control, such as high-speed conversion needs.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control.

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications. 

Output points: 64 points.

Output voltage and current: 24V ~ 0.2A/1 DC5 point.

2A/1 common end.

OFF leakage current: 0.1mA.

Response time: 1ms.

32 points and 1 common ends.

Leaky type.

40 pin connector.

With heat protection.

With short circuit protection.

With the surge absorber.

Ultra high speed processing, production time is shortened, better performance MITSUBISHI QD75D4. 

As applications become larger and more complex, it is necessary to shorten the system operation cycle time QD75D4

The operation period can be shortened by the super high basic operation speed 1.9ns.

In addition to achieve in the past with the control of single-chip high-speed control,

The system performance can be improved by reducing the total scan time,

To prevent any possible performance bias MITSUBISHI QD75D4. 

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming.

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming MITSUBISHI QD75D4. 

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register MITSUBISHI Differential output positioning module. 

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved MITSUBISHI Differential output positioning module. 

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

With the help of sample tracking function, the starting time is shortened

By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,

Testing procedures for the time, etc MITSUBISHI Differential output positioning module. , can shorten the time of failure analysis and start-up time.

In addition, the multi CPU system also helps to determine the datta transceiver time between the CPU module QD75D4. 

Can be used to analyze the data collected by programming tools,

In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily diisplayed MITSUBISHI QD75D4. 

And the sampling tracking results can be stored in LogViewer GX form CSV,

By recording data display and analysis tool LogViewer GX to display.

MITSUBISHI QD75MH2

Brand: MITSUBISHI
Name: Corresponding III SSCNET positioning module
Model: QD75MH2
"2 axes, SSCNET III type.
2 axis linear interpolation.
2 axis arc interpolation.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
40 pin connector.
Through the SSCNET III cable connection to save wiring, the distance between the station up to 50m.
Absolute position system for determining the origin position is supported by the return data set operation.
In addition, the limit switch of the upper limit, the lower limit switch and the near point block signal input can be directly connected to the servo amplifier,
Thus greatly reducing the wiring requirements.
Easy to achieve high speed, high precision positioning control.
Support for multiple types of positioning control,
Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..
In addition, can use the "Configurator-QP GX" and other software,
Easy to set, monitor and debug. "

Input points: 64 points.
Input voltage and current: 4mA DC24V.
Response time: 0.1/0.2/0.4/0.6/1ms.
32 point /1 a public side.
Common anode.
40 pin connector.
Easy connection programming tool via ethernet.
Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),
No need to carry out the IP address settings MITSUBISHI QD75MH2. And there is no need to select the cable, the straight line and the cross line can be used QD75MH
Therefore, this connection method and the use of USB, can easily communicate with the CPU,
Even the operators are not familiar with the network settings can easily establish a connection.
A variety of modules with excellent performance,
Meet the needs of various control from analog to location MITSUBISHI QD75MH2.
Q series module products include a variety of types of I/O, analog and positioning function module.
Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,
As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.
Can also be used in combination with the CPU module to achieve appropriate control MITSUBISHI QD75MH2.
Continue to go beyond, to climb the peak of Q series.
Strengthen security function.
Can be set up to 32 characters of the file password.
In addition to the English letters, numbers, but also the use of special characters,
To further enhance the security of the password.
In addition, only pre registered devices are allowed to access CPU,
To intercept unauthorized access to unauthorized users MITSUBISHI Corresponding III SSCNET positioning module MITSUBISHI Corresponding III SSCNET positioning module.
Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.1 axes, open collector output type.
Control unit: mm, inch, degree, pulse.
Location data: 600 data / axis.
Maximum pulse output: 200Kpps.
40 pin connector MITSUBISHI Corresponding III SSCNET positioning module.
Positioning module.
Open collector output.
Differential driver output.
Based on the use of open collector outputs and differential drive output type 2 types.
Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,
Transmission distance of up to 10 meters, to achieve high speed and high precision control.
(the command pulse of the open collector positioning module is highest 200kpps.)
A variety of modules with excellent performance,
Meet the needs of various control from analog to location.
Q series module products include a variety of types of I/O, analog and positioning function module.
Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,
As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.
Can also be used in combination with the CPU module to achieve appropriate control.
The possibility of expanding control with intelligent function.
Providing a variety of analog modules, is the ideal choice for process control applications.
Can allso meet the needs of high speed, high precision control QD75MH2.
Most suitable analog modules for high speed conversion control.
Can provide a variety of analog and digital analog conversion module products.
These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility MITSUBISHI QD75MH2.
Can meet the inverter control, such as high-speed conversion needs.

MITSUBISHI QD75M2

Brand: MITSUBISHI 

Name: Corresponding SSCNET positioning module

Model: QD75M2

"2 axes, SSCNET connection type.

2 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

40 pin connector.

Easy to achieve high speed, high precision positioning control.

Support for multiple types of positioning control,

Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..

In addition, can use the "Configurator-QP GX" and other software,

Easy to set, monitor and debug.

Saving wiring through SSCNET cable connections while simultaneously,

The length of the total cable distance up to 30m.

In addition, an absolute position system for determining the origin position is supported by the return data set operation of the origin.

No need for the near point block, such as wiring. "

Input: 4 channels.

Output (resolution): 0~20000, -20000~20000.

Input: DC-10~10V, DC0~20mA.

Conversion speed: 20 s/1 channel.

18 point terminal.

High insulation strength.

Can isolate electrical interference, such as current and noise, etc..

Standard analog input module.

Isolated analog input module.

No external isolation amplifier required MITSUBISHI QD75M2. 

Without the use of inter channel isolation analog modules QD75M2

Using the inter channel isolation analog module.

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications.

Can also meet the needs of high speed, high precision control.

Most suitable analog modules for high speed conversion control MITSUBISHI QD75M2. 

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility.

Can meet the inverter control, such as high-speed conversion needs.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location MITSUBISHI QD75M2. 

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI Corresponding SSCNET positioning module. 

Can also be used in combination with the CPU module to achieve appropriate control MITSUBISHI Corresponding SSCNET positioning module. 2 axes, open collector output type.

2 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

Maximum pulse output: 200Kpps.

40 pin connector.

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types MITSUBISHI Corresponding SSCNET positioning module. 

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control.

(the command pulse of the open collector positioning module is highest 200kpps.)

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control.

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications.

Can aalso meet the needs of high speed, high precision control QD75M2. 

Most suitable analog modules for high speed conversion control.

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility MITSUBISHI QD75M2. 

Can meet the inverter control, such as high-speed conversion needs.

MITSUBISHI QD75D2

Brand: MITSUBISHI 

Name: Differential output positioning module

Model: QD75D2

2 axis, differential drive output type.

2 axis linear interpolation.

2 axis interpolation.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

Maximum pulse output: 1Mpps.

40 pin connector.

Positioning module.

Open collector output.

Differential driver output.

Based on the use of open collector outputs and differential drive output type 2 types.

Differential driver output type positioning module can transmit high speed instruction pulse (up to 4Mpps) to the servo amplifier reliably,

Transmission distance of up to 10 meters, to achieve high speed and high precision control.

(the command pulse of the open collector positioning module is highest 200kpps.)

Can also meet the needs of high speed, high precision control.

Most suitable analog modules for high speed conversion control.

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility.

Can meet the inverter control, such as high-speed conversion needs.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.

Can also be used in combination with the CPU module to achieve appropriate control.

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications. 

Input points: 32 points.

Input voltage and current: 4mA DC24V.

Response time: 1/5/10/20/70ms.

32 point /1 a public side.

Common cathode.

37 pin D-sub connector.

Continue to go beyond, to climb the peak of Q series.

Strengthen security function.

Can be set up to 32 characters of the file password.

In addition to the English letters, numbers, but also the use of special characters,

To further enhance the security of the password MITSUBISHI QD75D2 

In addition, only pre registered devices are allowed to access CPU,

To intercept unauthorized access to unauthorized users.

Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.

Easy connection programming tool via ethernet MITSUBISHI QD75D2. 

Programming tools (Works2 GX, Developer GX) and CPU direct connection (1 to 1),

No need to carry out the IP address settings. And there is no need to select the cable, the straight line and the cross line can be used.

Therefore, this connection method and the use of USB, can easily communicate with the CPU,

Even the operators are not familiar with the network settings can easily establish a connection MITSUBISHI QD75D2. 

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of types of I/O, analog and positioning function module.

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields MITSUBISHI Differential output positioning module MITSUBISHI Differential output positioning module. 

Can also be used in combination with the CPU module to achieve appropriate control.Input: 8 channels.

30kpps/10kpps/1kpps/100pps/50pps/10pps/1pps/0.1pps.

Counter input signal: DC5/12-24V.

The module is suitable for the measurement of the number of input pulses, such as speed, speed, instantaneous flow rate and so on,

As well as the quantity, the length, the cumulative flow and so on the measurement MITSUBISHI Differential output positioning module. 

Input pulse values are updated every 10ms.

The number of pulses (sampling pulse number), which can be accumulated and processed by the moving average, is updated according to the counting period. 4 channels.

Input: DCO~20mA DC-10~10V.

Output (resolution): 0 ~ 20000; -20000 ~ 20000; -5000 ~ 22500.

Conversion speed of 20 s/1 channel.

18 point terminal station.

The possibility of expanding control with intelligent function.

Providing a variety of analog modules, is the ideal choice for process control applications.

Can also meet the needs of high speed, high precision control.

Most suitable analog modules for high speed conversion control.

Can provide a variety of analog and digital analog conversion module products.

These modules have a variety of functions, in the connection of equipment, to achieve the greatest flexibility.

Can meet the inverter control, such as high-speed conversion needs.

A variety of modules with excellent performance,

Meet the needs of various control from analog to location.

Q series module products include a variety of ttypes of I/O, analog and positioning function module QD75D2. 

Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,

As well as the requirements of high-precision control of thee positioning of the industry, the control needs of various fields MITSUBISHI QD75D2. 

Can also be used in combination with the CPU module to achieve appropriate control. 

MITSUBISHI QD75MH1

Brand: MITSUBISHI 

Name: Corresponding III SSCNET positioning module

Model: QD75MH1

"1 axes, SSCNET III type.

Control unit: mm, inch, degree, pulse.

Location data: 600 data / axis.

40 pin connector.

Through the SSCNET III cable connection to save wiring, the distance between the station up to 50m.

Absolute position system for determining the origin position is supported by the return data set operation.

In addition, the limit switch of the upper limit, the lower limit switch and the near point block signal input can be directly connected to the servo amplifier,

Thus greatly reducing the wiring requirements.

Easy to achieve high speed, high precision positioning control.

Support for multiple types of positioning control,

Including 2 ~ 4 axis 2 axis linear interpolation, circular interpolation, speed control and speed / position control, path switching control, constant speed control etc..

In addition, can use the "Configurator-QP GX" and other software,

Easy to set, monitor and debug. "

Input / output points: 4096 points.

Input / output soft element points: 8192.

Program capacity: 130K step.

Basic operation speed (LD): 1.9ns.

Program memory capacity: 520KB.

Peripheral device connection port: USB, Ethernet (communication support function).

Memory card I/F:SD memory card, extended SRAM card MITSUBISHI QD75MH1. 

Convenient processing of large capacity data.

In the past can not achieve the standard RAM and SRAM card file register area of continuous access,

The boundary of each area should be considered in programming QD75MH1. 

The SRAM 8MB extension card is installed in the high speed universal QCPU,

Standard RAM can be used as a continuous file register,

Capacity up to 4736K words, thus simplifying the programming MITSUBISHI QD75MH1. 

Thus, even if the memory space of the soft element is insufficient,

Can also be installed by the expansion of SRAM card, easy to extend the file register area.

The address register is extended to 32 bits, which can be programmed to go beyond the traditional 32K word,

And to achieve the extension to the file register to all regions of the file register.

In addition, the processing speed of the index modification plays an important role in the efficient operation of structured data (array),

The speed has been improved MITSUBISHI QD75MH1. 

When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.

Support USB and RS232.

Support installed memory card.

Providing high speed communication between multiple CPU MITSUBISHI Corresponding III SSCNET positioning module. 

Shorten the fixed scan interrupt time, high precision device MITSUBISHI Corresponding III SSCNET positioning module. 

The minimum interval of the fixed period interrupt program is reduced to 100 s.

The high speed signal can be accurately obtained, which makes the contribution to the higher precision of the device.

High speed and high precision machine control by multi CPU.

By parallel processing of the linear and multi CPU high-speed communication (cycle 0 MITSUBISHI Corresponding III SSCNET positioning module QD75MH1. 88ms) of the parallel control program, the high speed control.

Multi CPU high speed communication cycle and motion control synchronization, so it can achieve the maximization of computing efficiency.

Inn addition, the latest movement control CPU in performance is 2 times the previous model,

To ensure high speed and high accuracy of the machine control MITSUBISHI QD75MH1.