MITSUBISHI Q55B

Condition                      New

Weight (kg)                   0.23

Our Part Number          Q55B

Height (mm)                 98

Width (mm)                  189

Depth (mm)                  44.1

Brand                           Mitsubishi

Manufacturer Range    Q Series

Short Description         Mitsubishi Q Series Extension base with 5 I/O slots

MITSUBISHI Q52B

Condition                   New

Weight (kg)                0.14

Our Part Number       Q52B

Height (mm)               98

Width (mm)                106

Depth (mm)                44.1

Brand                         Mitsubishi

Manufacturer Range  Q Series  

Short Description       Mitsubishi Q Series Extension base with 2 I/O slots

MITSUBISHI MR-J3-60B

Brand: MITSUBISHI 

Name: SSCNET type III optical fiber communication driver

Model: MR-J3-60B

MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.

Rated output: 0.6kw.

Interface type: SSCNET type III fiber communication.

Power specification: single phase AC200V.

High speed serial communication between the SSCNET and the servo amplifier by using the fastest up to 0.44ms communication cycle,

A fully synchronous control system can be constructed.

It is only necessary to insert the special optical fiber into the joint to form SSCNET III network, which greatly reduces the wiring work and reduces the possibility of false wiring.

Due to the adoption of the optical fiber communication, the anti noise ability can be greatly improved and the long distance wiring of 50 meters (maximum 800 meters x 16 axes) can be realized.

A servo amplifier to meet the full closed loop control function MR-J3-B-RJ006.

Suitable for mechanical servo optimization and adjustment!

More advanced optimization adjustment function and control function to maximize mechanical properties. 

Motor series: low inertia, medium capacity.

Rated output power: 15.0kw.

Rated speed: 1000rpm.

With the brake: without.

Shaft end: straight shaft.

The rotor of the servo motor is a permanent magnet, which is controlled by the U/V/W,

The rotor rotates under the action of the magnetic field, and the encoder feedback signal of the motor is given to the driver,

According to the feedback value and the target value, the driver adjusts the rotation angle of the rotor MITSUBISHI MR-J3-60B MR-J3-60B 

Accuracy of the servo motor depends on the accuracy of the encoder (number of lines). Motor: HA-MH type super small.

Power: 0.05kw.

Speed: 3000r/min.

Electric machine is a kind of electromagnetic device which can convert or transfer electric energy according to the law of electromagnetic induction MITSUBISHI MR-J3-60B. 

In the circuit with the letter M (the old standard with D) said.

Its main function is to produce the driving torque, as a power source of electrical appliances or mechanical.

The generator is represented by the letter G in the circuit.

Its main function is to convert mechanical energy into electrical energy,

At present, the most commonly used, the use of heat, water and other power generator rotor to generate electricity MITSUBISHI MR-J3-60B. Motor series: medium inertia, medium power.

Rated output power: 1.0kw.

Rated speed: 2000r/min.

Whether to take the brake: No.

Shaft end: Standard (straight).

Power supply: 400V type.

Protection level: IP65 (IP67) MITSUBISHI Universal pulse interface driver. 

Features: medium inertia from low speed to high speed three modes for selection, suitable for different applications MITSUBISHI Universal pulse interface driver. 

Application examples: transmission machinery, robots, X-Y working platform.

High resolution encoder 131072p/rev (17 bit).

The encoder with high resolution ensures excellent performance and stability at low speed.

All motor dimensions are the same as before and all are compatible with the wiring MITSUBISHI Universal pulse interface driver. Motor series: medium inertia, medium power.

Rated output power: 3.5kw.

Rated speed: 1000r/min.

Whether to bring the brakes: with.

Shaft end: Standard (straight).

Protection level: IP65 (IP67).

Features: medium inertia from low speeed to high speed three modes for selection, suitable for different applications MR-J3-60B. 

Application examples: transmission machinery, robots, X-Y working platform.

High resolution encoder 131072p/rev (17 bit).

The encoder with high reesolution ensures excellent performance and stability at low speed MITSUBISHI MR-J3-60B. 

All motor dimensions are the same as before and all are compatible with the wiring. 

MITSUBISHI MR-J4-700A

Brand: MITSUBISHI 

Name: Servo driver

Model: MR-J4-700A

1 axis servo amplifier.

MITSUBISHI general AC servo amplifier MELSERVO-J4 series.

Rated output: 7.0kw.

Interface: General purpose.

Power supply: three phase AC200V.

Servo amplifier supporting universal interface.

Servo amplifier for universal interface.

Speed / torque control of position control and analog voltage command can be carried out by using pulse train command.

Support Max instruction pulse frequency 4 Mpulses/s.

Improve mechanical properties by high performance motor.

By improving the resolution and processing speed of the encoder,

The rotating servo motor has higher precision and better performance of rotation.

Only open a key type of adjustment function, can be carried out including mechanical resonance filter, high end seismic control II, low pass filter servo gain adjustment.

Easily start advanced seismic function, it can maximize the mechanical properties.

It can automatically adjust the required response settings automatically. 

Servo motor series: low inertia, medium and large capacity.

Rated output: 37.0kw.

Rated speed; 1500r/min.

Electromagnetic brake: incidental.

Power supply: 400V.

Most suitable for medium and large capacity, low inertia type products in high frequency operation or acceleration and deceleration operation MITSUBISHI MR-J4-700A. 

Improve the environmental performance of HG-SR, HG-JR series of products using IP67 MR-J4-700A

High speed & high torque. Shorten the positioning time, achieve high-speed equipment.

100 scene, there are 100 different drive control.

In order to meet the needs of the diverse and detailed field,

MR-J4 product line configuration, providing a wealth of servo amplifier and servo motor products.

Can meet the different needs of different customers MITSUBISHI MR-J4-700A. The length of the line: 30M.

Relay type.

IP level: IP20.

Bending life: standard.

Encoder with cable (amplifier side); for HF-KP/HF-MP series. "MITSUBISHI general purpose AC servo amplifier MELSERVO-J2-Super series.

Rated output: 7.0kw.

Universal interface.

Voltage: 3 phase AC200VAC or single phase AC230V.

Super function, excellent performance.

Super function, excellent performance MITSUBISHI MR-J4-700A. 

High performance CPU integration, greatly improve product responsiveness.

Due to the application of high performance CPU, so that the response can be greatly improved.

Speed loop frequency response increased to more than 550HZ MITSUBISHI Servo driver. 

MR-J2-Super series is the best device for high speed positioning applications.

Easy adjustment.

Model adaptive control / advanced real time automatic tuning MITSUBISHI Servo driver. 

Mechanical analysis function.

Can analysis of the frequency characteristics of the mechanical system, the results can be easily set up "mechanical resonance suppression filter"

Mechanical simulation function.

The function can be realized without the actual replacement of the motor MITSUBISHI Servo driver. Read mechanical analysis results to simulate the response of the user''s mechanical system. "Motor series: low inertia, low power.

Rated output power: 0.75kw.

Rated speed: 3000r/min.

Whether to bring the brakes: with.

Shaft end: Standard (straight).

Protection level: IP55 does not include the shaft part and the connector.

Features: low inertia is particularly suitable for high speed motor (6000 or 12000 RPM / min) of general industrial machinery.

Application example 1: drive belt drive, robot.

Application example 2: assembly machine, sewing machiine, X-Y working table MR-J4-700A. 

Application example 3: food manufacturing machinery, semiconductor manufacturing equipment, knitting machine and embroidery machine.

High resolution encoder 131072p/rev (17 bit).

The encoder with high reesolution ensures excellent performance and stability at low speed MITSUBISHI MR-J4-700A. 

All motor dimensions are the same as before and all are compatible with the wiring.

HMI PROFACE AGP3600-T1-D24-M

Functional Specifications

Display Type
TFT Color LCD
Display Size
12.1"
Resolution
800 x 600 pixels (SVGA)
Dot pitch
W0.3075 x H0.3075 mm [W0.01 x H0.01 in.]
Effective Display Area
W248 x H186.5 mm [W9.76 x H7.34 in.]
Display Colors
65,536 Colors (No blink)/16,384 Colors (Blink)
Backlight
When GP Revision 5 and later:
LED (When replacement is required,contact your local GP distributor)
When GP Revision 5 and earlier:
CCFL (Replaceable)*1
Brightness Control
8 Levels (Adjusted with the touch panel)
Contrast Control
Not applicable
Backlight Service Life
50,000 hrs. or more (continuous operation at 25℃ before backlight brightness decreases to 50% or backlight starts to blink)
Language Fonts
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.
Character Sizes
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font Sizes
Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.
8 x 16 dots
100 char. x 37 rows
16 x 16 dots
50 char. x 37 rows
32 x 32 dots
25 char. x 18 rows
8 x 8 dots
100 char. x 75 rows
Program Area
FLASH EPROM 132 KB
Number of Step
Equivalent to 15,000 steps*2
Variable Area
SRAM 64 KB (uses lithium battery)*3
Application Memory
FLASH EPROM 16 MB*4
Data Backup
SRAM 320KB (uses lithium battery)*5
Clock Accuracy
±65 sec/month (deviation at room temperature and power is OFF)*6
Touch Panel Type
Resistive Film (analog)
Touch Panel Resolution
1,024 x 1,024
Touch Panel Service Life
1,000,000 times or more
Serial (COM1)
RS-232C/422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector: D-Sub9 (plug)
Serial (COM2)
RS-422/485, Asynchronous Transmission, Data Length: 7 or 8 bit, Parity: none, Even or Odd, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps (MPI), Connector: D-Sub9 (socket)
Ethernet (LAN)
IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX, Connector: Modular jack (RJ-45) x 1
Expansion Unit 1
Communication Expansion Unit x 1
Expansion Unit 2
VM/DVI Input Expansion Unit x 1
USB (TYPE-A)
Conforms to USB1.1 (TYPE-A) x 2, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500 mA or less, Communication Distance: 5 m or less
Expansion Memory
Function Expansion Memory x 1 (Inside interface cover)
CF Card
Compact Flash Card Slot (TYPE-II) x 1
Sound Output
Speaker Output, 70 mW (Rated Load: 8 Ω, Frequency: 1 kHz), Connector: 2-piece terminal block (AUX) x 1
AUX Input/Output
Alarm Output, RUN Output, Buzzer Output, Rated Voltage: DC24V, Rated Current: 50mA, Remote Reset Input, Input Voltage: DC24V, Connector: 2-piece terminal block (AUX) X 1
DIO (Source Type)
6-Point Input Sink Source, , 2-Point Output Sink, Connector: 12pin

HMI PROFACE PFXGM4301-TAD

Brand: Proface 

Name: 5.7 inch module type touch screen

Model: PFXGM4301TAD(GP-4301TM)

"Module type compact.

Input voltage: DC24V.

Screen size: 5.7 inches.

Display type (resolution):65536 color TFT display LCD (QVGA 320 x 240 pixels).

Touch panel type: analog resistance.

Memory: 8MB (internal memory), nvSRAM128KB (non-volatile, no battery).

Ethernet interface: 1.

Serial port: RS-232C * 1, RS-422/485 * 1.

SD card slot (max 32GB): No.

USB interface: Type-A x (2) USB 1, Mini-B USB (2) x 1.

Replaceable battery: no (rechargeable battery).

Alarm analysis function block: No.

Coating models: none.

The use of drag and drop operations, can be easily shared between the man-machine interface and the control program of the symbolic register data,

Make the programming process intuitive and efficient.

In addition, the common and special control function is defined as the function block, which simplifies the design of the control system.

The man-machine interface picture is directly connected with the control program, which can realize the efficient programming.

6 Display Module 2 host module, can realize the 12 kinds of "intelligent platform".

Modular design, display module and the host module can be split,

Therefore can be replaced respectively.

Display module and host module free combination, function and size of flexible. "

"Size: 5.7 inches.

Display type: STN pseudo color LCD.

Resolution: 320 x 240 pixels (QVGA).

Display color: 256 color (no flash) /64 color (3 speed flicker).

Power supply: DC24V.

Interface: USB (TYPE-A), RS-232C, RS-422/485 (MPI).

Brightness adjustment: 8 level adjustment can be carried out by touch panel Proface PFXGM4301TAD(GP-4301TM). 

You can easily and intuitively set the address by dragging and dropping the mouse PFXGM4301TAD(GP-4301TM)

In addition, click on the use of the address can be displayed on the screen number and part number.

Click the part number to jump to the screen using the widget.

The same software supports all 3000 series of Pro-face man-machine interface.

From the screen to create the programming, the functions are simple and easy to use Proface PFXGM4301TAD(GP-4301TM). 

Learn a software, master all the skills.

Support efficient image creation.

ID management and operation log reduces downtime.

Improve the operation mode, reduce the cost and workload.

Analysis of failure causes according to the operation log.

Check register status on historical trend chart.

Drag and drop functionality makes the software interface easier to operate.

A variety of components to provide a variety of components, easy to create a beautiful picture Proface PFXGM4301TAD(GP-4301TM). 

In addition, there are a variety of 256 color components can be used.

Using the alarm log to quickly check and display the alarm message and register value, it is easier to find the cause of the fault Proface 5.7 inch module type touch screen. 

Register value will be recorded when the alarm is issued.

Therefore, the state of the register and its value can be obtained while acquiring the alarm message Proface 5.7 inch module type touch screen. 

A comparison of the data is helpful to find the cause of the fault.

These "sample parts" can be used directly, and the design time is greatly reduced.

According to ID number of easy access to the operation log, through the analysis of the operation to improve production efficiency Proface 5.7 inch module type touch screen. 

Use ID based on the number of authorized mode of operation, can be recorded when, who performed the operation.

Using this data, you can analyze the causes of all the faults that have occurred. "Screen size: 10.4 inches.

Display type: TFT colorr LCD PFXGM4301TAD(GP-4301TM). 

Display color: 256 color (no flash) /64 color (3 speed flicker).

Backlight: CCFL (service life: more than 50000 hours, 24 hours of continuous work).

Resolution: 640 x 480 pixels.

Brightness control: 4 level adjjustment can be carried out by touch panel Proface PFXGM4301TAD(GP-4301TM). 

Voltage: AC220V.

Internal memory: FLASH EPROM 4MB.

Backup memory: 256KB SRAM.

Interface: Ethernet, CF card.

HMI PROFACE AGP3500-T1-D24

Brand: Proface 

Name: 10.4 inch touch screen (NPN model)

Model: AGP3500-T1-D24-D81K(PFXGP3500TADDK)

Controller DIO (NPN model):6 point type NPN input, 2 point NPN type output, connector: 12 pin.

Specification: DC24/C (control) level models.

Display type: TFT color LCD (Gao Liangdu).

Display size: 10.4 inches.

Resolution: 640 x 480 pixels (VGA).

Display color: 65536 color (no flicker) /16384 color (flashing).

Backlight: cold cathode lamp (replaceable).

Brightness adjustment: 8 level adjustment can be carried out by touch panel.

Variable area: 64KB SRAM (using lithium battery).

Program area: EPROM 132KB FLASH.

Step number: equivalent to 15000 steps.

Touch panel type: resistance type (analog).

Simulated running status on PC.

Use PC simulation function, do not need to transfer the picture to GP,

You can check all the functions of GP on the PC - including the screen operation, D script, logical script.

Record machine status to diagnose error causes.

GP3000 series of M (Multimedia) level models of the event recording function can be recorded in the operation of the device,

This will help save and analyze the error log.

Rich sample images can reduce programming time.

Pro-face provides a large number of sample images and 3D parts,

So you can easily create a beautiful and intuitive picture, in order to save editing time.

Can improve the efficiency of the 5 functions.

Using EX GP-Pro can easily create a clear picture and save the creation time.

Screen and logic programming software EX GP-Pro interface is very friendly,

The drag and drop feature makes the software interface easy to operate.

EX GP-Pro powerful features, such as 3D simulation components, image fonts and simulation functions,

Even beginners can easily and quickly grasp how to create a picture. 

GP4000E series entry-level programmable man-machine interface.

Screen size: 10 inch widescreen.

Display type: TFT color LCD.

Resolution: 800 x 480 pixels (WVGA).

Display color number: 65536 color.

Backlight: LED.

Internal memory: EPROM FLASH 32 MB.

Backup memory: EPROM FLASH 128 KB.

Interface: RS-232C, RS-422/485, Ethernet, USB Proface AGP3500-T1-D24-D81K(PFXGP3500TADDK). 

Voltage: DC24V.

Easy to direct AGP3500-T1-D24-D81K(PFXGP3500TADDK)

GP4000E full range of standard Ethernet, can be connected to a variety of industrial controller,

Such as PLC, motion controller, robot, vision sensor, etc..

Expanding business.

All hardware can be used to create the required EX GP-Pro screen.

All hardware equipment using the same development platform, is conducive to the development of new business Proface AGP3500-T1-D24-D81K(PFXGP3500TADDK). 

Reduce the burden of CPU PLC.

GP4000E series can use internal logic programming function (ladder diagram programming) to reduce the burden of CPU PLC.

More humanized design.

USB1 (A Type) on the lock and prevent the U disk to drop the lock screw.

Sliding type battery cabin, so that more convenient to replace the battery.

3 communication interface (1 network port, serial port 2), not only can be directly connected with the PLC,

And can be directly connected with other controllers (SCM, thermostat),

Helps to reduce the cost of the modules to be added after connecting these controllers with PLC Proface AGP3500-T1-D24-D81K(PFXGP3500TADDK). 

Take time for the bad production environment

Low power consumption, no heat sink holes, effectively reduce dust and water vapor intrusion Proface 10 Proface 10.4 inch touch screen (NPN model). 4 inch touch screen (NPN model). 

PCBA reinforced coating process (fully automatic mechanical coating),

Farewell to the use of dust, humidity and other harsh environment concerns."Resolution: 640 x 480 pixels.

Display color: 256 color.

Internal memory: FEPROM 2MB.

Backup memory: SRAM 128KB.

In the programmable man-machine interface screen can display the Windows font you need into image data Proface 10.4 inch touch screen (NPN model). 

Now you can increase the font in the general conversion coefficient of 8, 2, 4 and 1,

And zoom in between 1 and 8.

This allows you to precisely adjust the font size to suit your layout.

Simple arrangement of components and markers to select 1200 of the available styles can be quickly and easily create the screen.

Touch input unit, start input mode.

Increase the number of times, the cumulative time and alarm level message.

Alarm sort function (according to the date, the number of times, etc.).

Increase in the number of clocks, from the previous 3 to 8.

Different colors represent different levels of information.

Multiple input items, can be specified in the input sequence function (also can specify the group).

When the individual setting parameters are changed, the notification bit can be set.

Automatically bounce the keyboard position, can be more flexible settings.

High definition picture resolution function menu for beginners to learn programming design.

The parts list and edit images are in the same window,

So you can use a simple drag and drop action,

Pull the parts into the edit screen to quickly and easily configure the components you need.

Move the mouse to the appropriate parts of the image, there will be a description of the operation of the parts,

Help you make the edit screen.

Using Tags can make the picture editing more fllexible AGP3500-T1-D24-D81K(PFXGP3500TADDK). 

Up to 3 windows can be displayed at the same time (in which 2 Tag U window).

Display history alarm data.

Production site data or data can be collected through the Pro-Server immediately to PC a vaariety of applications Proface AGP3500-T1-D24-D81K(PFXGP3500TADDK). 

Automatic acquisition of production data and can improve the quality and productivity.

Touch panel operation is easier to set.

"