Remarks：
MT8102iE/MT8103iE’s COM3 can either use RS-485 or RS-232. However, only Tx & Rx (no RTS/CTS) may be used for COM1 RS232 when COM3 RS-232 is also used
MT8100iE/MT8101iE/MT8102iE/MT8103iE COM Port Pin-out Comparisons
BELANJA ONLINE : www.automationjayastore.com
Selasa, 23 Oktober 2018
HMI WEINVIEW MT8071IP
Speksifikasi
Display:7inch TFT LCD
Resolution:800 x 480
Colors:16M
Flash:128 MB
RAM:128 MB
Processor:32 Bits RISC Cortex-A8 600MHz
USB Host:USB 2.0 x 1
Ethernet:10/100 Base-T x 1
COM Port:COM1: RS-232, COM2: RS-485 2W/4W
RS-485 Dual Isolation:N/A
Input Power:2420% VDC
Power Consumption:500mA@24VDC
Dimensions WxHxD:200.4 x 146.5 x 34 mm
Panel Cutout:192 x 138 mm
Resolution:800 x 480
Colors:16M
Flash:128 MB
RAM:128 MB
Processor:32 Bits RISC Cortex-A8 600MHz
USB Host:USB 2.0 x 1
Ethernet:10/100 Base-T x 1
COM Port:COM1: RS-232, COM2: RS-485 2W/4W
RS-485 Dual Isolation:N/A
Input Power:2420% VDC
Power Consumption:500mA@24VDC
Dimensions WxHxD:200.4 x 146.5 x 34 mm
Panel Cutout:192 x 138 mm
HMI WEINVIEW/WEINTEK TK6070IP
Weinview/Weintek 7 inch PLC HMI TK6070IP TK6070IP 1WV TK6070IP1WV PB68Description:
WEINVIEW HMI port can communicate with most of the equipment, Especially Allen-Bradley,Omron,Mitsubishi,Siemens,LG,Modicon,Ge,Fanuc,SNP-X,Delta,Facon,Liyan Ex Series,Matsushita ,IDEC ,Keyence Kv Series ,Toshiba T Series , Koyo,Vigor, Yokogawa Fa-M3,Parker Compax3, Saia Pcd S-Bus Mode ,Sew Eurodrive Movitrac , Baumuller Servo ,Heng Yuan Sensor and so on.
SPEK:
Monitor:7 TFT
Resolution(WxH dots):800x480
Brightness(cd/m2):350
Backlight type:LED
Backlight service life:>30,000 hours
Display colors:65536 types
Type:Four-wire analog resistance type
Touch precision:Active Area Length(X)2%,Width(Y)2%
Flash RAM(MB):128
DRAM:64
Processor:32 Bit RISU CPU 400MHz
Mini USB downloading port:USB2.0 X 1
COM connectivity port:COM 1 RS-232, COM 2 RS-485 2W/4W
Calendar:Built-in
Input power:2420%VDC
Power dissipation:350mA@24V
Isolated power supply:None
Pressure-proof:500 VAC(per min)
Insulating resistance:Over 500MW at 500 VDC
Quake-proof:10 to 25Hz(Direction X,Y,Z 2G 30 mins)
Sheathing material:Industrial plastics
Outside measurement WxHxD:200.4 x 146.5 x 34mm
Opening size(mm):192 x 138
Protection level:IP65 front panel protection
Storage Temperature:-200~ 600(-40~ 1400F)
Operating Temperature:00~ 500C(320~ 1220F)
Operating Humidity:10% ~ 90%(No condensation)
WEINVIEW HMI port can communicate with most of the equipment, Especially Allen-Bradley,Omron,Mitsubishi,Siemens,LG,Modicon,Ge,Fanuc,SNP-X,Delta,Facon,Liyan Ex Series,Matsushita ,IDEC ,Keyence Kv Series ,Toshiba T Series , Koyo,Vigor, Yokogawa Fa-M3,Parker Compax3, Saia Pcd S-Bus Mode ,Sew Eurodrive Movitrac , Baumuller Servo ,Heng Yuan Sensor and so on.
SPEK:
Monitor:7 TFT
Resolution(WxH dots):800x480
Brightness(cd/m2):350
Backlight type:LED
Backlight service life:>30,000 hours
Display colors:65536 types
Type:Four-wire analog resistance type
Touch precision:Active Area Length(X)2%,Width(Y)2%
Flash RAM(MB):128
DRAM:64
Processor:32 Bit RISU CPU 400MHz
Mini USB downloading port:USB2.0 X 1
COM connectivity port:COM 1 RS-232, COM 2 RS-485 2W/4W
Calendar:Built-in
Input power:2420%VDC
Power dissipation:350mA@24V
Isolated power supply:None
Pressure-proof:500 VAC(per min)
Insulating resistance:Over 500MW at 500 VDC
Quake-proof:10 to 25Hz(Direction X,Y,Z 2G 30 mins)
Sheathing material:Industrial plastics
Outside measurement WxHxD:200.4 x 146.5 x 34mm
Opening size(mm):192 x 138
Protection level:IP65 front panel protection
Storage Temperature:-200~ 600(-40~ 1400F)
Operating Temperature:00~ 500C(320~ 1220F)
Operating Humidity:10% ~ 90%(No condensation)
OMRON CS1W-DRM21-V1
Brand: OMRON
Name: DeviceNet Unit
Model: CS1W-DRM21-V1
Product: DeviceNet Unit.
Specifications: For CS Series,
Functions as either a master or a slave.
2,048 I/O points.
Standards: UC1, N, L, CE.
A DeviceNet Unit for the CS Series.
That Boasts Industry-leading.
Performance and Functions.
Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
Thermocouple Input Units.
points Input: 4 inputs.
Signal range selection:
Set separately for each input.
I/O type: R, S, K, J, T, L, B.
Conversion speed: 250 ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1 OMRON CS1W-DRM21-V1.
Current consumption: 5V, 0.25A; 26V, --.
Standards: UC1, CE CS1W-DRM21-V1
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value OMRON CS1W-DRM21-V1.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
with previous systems OMRON CS1W-DRM21-V1.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCUs,
to construct complete process control systems OMRON DeviceNet Unit.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools. Unit type: CS-series Special I/O Units OMRON DeviceNet Unit.
Product name: Analog Input Units.
Specifications: I/O points, 4 inputs;
Signal range selection,
Set separately for each input;
Signal range, 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 V to 10 V, 4 to 20 mA;
Resolution, 1/8,000 (Settable to 1/4,000);
Conversion speed, 250 s/point max OMRON DeviceNet Unit.
(Settable to 1 ms/point).
Externa connection, Removable terminal block.
Current consumption: 5V, 0.12A; 26V, 0.09A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. Unit type: CS1 Basic I/O Units.
Product name: DC Input/Transistor Output Unit.
Specifications: 24 VDC, 6 mA 32 inputs.
Mountable Racks: CPU Rack, CS1W-BC,
@@3, Yes, @@2, Yes;
C200HX/HG/HE Exxpansion I/O Rack, No CS1W-DRM21-V1.
CS1 Expansion Rack, CS1W-BI,
@@3, Yes, @@2, Yes;
CS1 Long distance Expansion Rack, Yes;
SYSMAC BUS Slave Rack, No.
Words required: 2 input words and 2 output words.
Current consumption: 5V system, 0.227A;
26 V system, -- OMRON CS1W-DRM21-V1.
Standards: U, C, N, L, CE.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control.
MITSUBISHI Q172CPUN
Brand: MITSUBISHI Name: Motion CPU moduleModel: Q172CPUNControl axis: maximum 8 axes.
Greater flexibility.
PLC control and motion control using independent CPU, optimize the system configuration.
More than 4 CPU modules can be freely selected in multi CPU system.
MITSUBISHI SSCNET control function.
By using the high speed serial communication mode, we can easily construct the synchronization system of the servo motor.
The motion controller and the servo amplifier can be quickly connected by a connector, and the connection is simplified.
Each 1 CPU can control up to 32 axes at the same time.
Can control the small capacity from 10W to 55KW large capacity servo motor.
Through the use of digital oscilloscope function, can be used to control the power distance, speed, position and other motor information monitoring.
FL-net (OPCN-2) Ver.2.00 interface.
10BASE2 use.
Real time transmission control data, to improve the production efficiency and the value of the equipment to provide support for the high-speed data communication module.
The high accuracy data that can be synchronized with the sequential scanning to the user program on the PC can be transmitted through the Ethernet MITSUBISHI Q172CPUN.
Realize the previous communication method can not achieve the detailed control of data transmission,
Real time data analysis using user applications,
In order to provide support for improving production efficiency and equipment value Q172CPUNOptimal network matching for application purposes and applications,
Seamless communication between different hierarchical systems MITSUBISHI Q172CPUN.
Enhancing the ability of information communication through network.
This is also a major task in the field of automation.
Network environment provided by Q series
Is truly open & seamless.
Including based on universal ethernet,
Achieve easy management of the environment "IE Control CC-Link" controller network,
As well as in its management to achieve a high-speed, high-capacity transmission of the "IE Field CC-Link" field network MITSUBISHI Q172CPUN.
Also including Japan''s first, to achieve the world standard,
And get the SEMI certification of the field network "CC-Link",
And inherited the design concept of the provincial distribution network CC-Link/LT" MITSUBISHI Motion CPU module.
And support sensor networks "AnyWire",
To enrich the lineup flexibility to integrate the various layers of automation network MITSUBISHI Motion CPU module. Input points: 32 points.
Input voltage and current: 4mA DC24V.
Response time: 1/5/10/20/70ms.
32 points and 1 common ends.
Common anode.
Output points: 32 points.
Output voltage and current: DC12-24V; 0.1A/ point; 2A/ common.
Response time: 1ms.
1 point 32 public end, leakage type; 40 pin connector MITSUBISHI Motion CPU module.
With thermal protection.
With short circuit protection.
With the surge absorber.
With the help of sample tracking function, the starting time is shortened
By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,
Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.
In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.
Can be used to analyze the data collected by programming tools,
In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.
And the sampling tracking results can be stored in LogViewer GX form CSV,
By recording data display and analysis tool LogViewer GX to display.
Ultra high speed processing, production time is shortened, better performance.
As applications become larger and more complex, it is necessary to shorten the system operation cycle time.
The operation period can be shortened by the super high basic operation speed 1.9ns.
In addition to achieve in the past with the control of single-chip high-speed control,
The system performance can be improved by reducing the total scan time,
To prevent any possible performance bias.
Convenient processing of large capacity data.
In the past can not achieve the standard RAM and SRAM card file register area of continuous access,
The boundary of each area should be considered in programming.
The SRAM 8MB extension card is installed in the high speed universal QCPU,
Standard RAM can be used as a continuous file register,
Capacity up to 4736K words, thus simplifying the programming.
Thus, even if the memory space of the soft element is insufficient,
Can also be installed by the expansion of SRAM card, easy to extend the file register area.
The address register is extended to 32 bits, which can be programmed to go beyond the traditioonal 32K word,
And to achieve the extension to the file register to all regions of the file register Q172CPUN.
In addition, the processing speed of the index modification plays an important role in the efficient operation of structured daata (array),
The speed has been improved MITSUBISHI Q172CPUN.
When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.
Greater flexibility.
PLC control and motion control using independent CPU, optimize the system configuration.
More than 4 CPU modules can be freely selected in multi CPU system.
MITSUBISHI SSCNET control function.
By using the high speed serial communication mode, we can easily construct the synchronization system of the servo motor.
The motion controller and the servo amplifier can be quickly connected by a connector, and the connection is simplified.
Each 1 CPU can control up to 32 axes at the same time.
Can control the small capacity from 10W to 55KW large capacity servo motor.
Through the use of digital oscilloscope function, can be used to control the power distance, speed, position and other motor information monitoring.
FL-net (OPCN-2) Ver.2.00 interface.
10BASE2 use.
Real time transmission control data, to improve the production efficiency and the value of the equipment to provide support for the high-speed data communication module.
The high accuracy data that can be synchronized with the sequential scanning to the user program on the PC can be transmitted through the Ethernet MITSUBISHI Q172CPUN.
Realize the previous communication method can not achieve the detailed control of data transmission,
Real time data analysis using user applications,
In order to provide support for improving production efficiency and equipment value Q172CPUNOptimal network matching for application purposes and applications,
Seamless communication between different hierarchical systems MITSUBISHI Q172CPUN.
Enhancing the ability of information communication through network.
This is also a major task in the field of automation.
Network environment provided by Q series
Is truly open & seamless.
Including based on universal ethernet,
Achieve easy management of the environment "IE Control CC-Link" controller network,
As well as in its management to achieve a high-speed, high-capacity transmission of the "IE Field CC-Link" field network MITSUBISHI Q172CPUN.
Also including Japan''s first, to achieve the world standard,
And get the SEMI certification of the field network "CC-Link",
And inherited the design concept of the provincial distribution network CC-Link/LT" MITSUBISHI Motion CPU module.
And support sensor networks "AnyWire",
To enrich the lineup flexibility to integrate the various layers of automation network MITSUBISHI Motion CPU module. Input points: 32 points.
Input voltage and current: 4mA DC24V.
Response time: 1/5/10/20/70ms.
32 points and 1 common ends.
Common anode.
Output points: 32 points.
Output voltage and current: DC12-24V; 0.1A/ point; 2A/ common.
Response time: 1ms.
1 point 32 public end, leakage type; 40 pin connector MITSUBISHI Motion CPU module.
With thermal protection.
With short circuit protection.
With the surge absorber.
With the help of sample tracking function, the starting time is shortened
By using the sampling and tracking function, it is convenient to analyze the data when the fault occurs,
Testing procedures for the time, etc., can shorten the time of failure analysis and start-up time.
In addition, the multi CPU system also helps to determine the data transceiver time between the CPU module.
Can be used to analyze the data collected by programming tools,
In the form of charts and trend charts, the data changes of the bit soft element and the word soft element can be easily displayed.
And the sampling tracking results can be stored in LogViewer GX form CSV,
By recording data display and analysis tool LogViewer GX to display.
Ultra high speed processing, production time is shortened, better performance.
As applications become larger and more complex, it is necessary to shorten the system operation cycle time.
The operation period can be shortened by the super high basic operation speed 1.9ns.
In addition to achieve in the past with the control of single-chip high-speed control,
The system performance can be improved by reducing the total scan time,
To prevent any possible performance bias.
Convenient processing of large capacity data.
In the past can not achieve the standard RAM and SRAM card file register area of continuous access,
The boundary of each area should be considered in programming.
The SRAM 8MB extension card is installed in the high speed universal QCPU,
Standard RAM can be used as a continuous file register,
Capacity up to 4736K words, thus simplifying the programming.
Thus, even if the memory space of the soft element is insufficient,
Can also be installed by the expansion of SRAM card, easy to extend the file register area.
The address register is extended to 32 bits, which can be programmed to go beyond the traditioonal 32K word,
And to achieve the extension to the file register to all regions of the file register Q172CPUN.
In addition, the processing speed of the index modification plays an important role in the efficient operation of structured daata (array),
The speed has been improved MITSUBISHI Q172CPUN.
When the index is used to modify the program repeatedly (e.g. from FOR to NEXT), the scan time can be reduced.
MITSUBISHI Q64TDV-GH
Brand: MITSUBISHI
Name: Thermocouple type temperature input module
Model: Q64TDV-GH
Input: 4 channels.
Thermocouple (C1602~1995 JIS).
Micro voltage (-100mV~100mV).
Conversion speed: (sampling period x3) /1 channel.
18 point terminal station.
Most suitable for process control of isolated analog modules.
Temperature data can be collected by connecting thermocouple / thermal resistance.
Products can choose multi-channel (8 channel) input type and channel isolation type.
Customers can choose the most suitable model according to the intended use.
Auto backup key data
Save the program and parameter files automatically to the program memory (ROM Flash) without using the backup battery,
To prevent the loss of the program and the parameters due to forgetting to replace the battery.
In addition, the soft component data and other important data can be backed up to the standard ROM,
In order to avoid during the long holiday and other planned downtime,
The data is lost due to battery depletion.
The next time the power is turned on, the backup data will be automatically restored.
Reduce system downtime recovery time.
With a simple operation, you can back up all the data in the CPU to the memory card.
Through regular backup, can be the latest parameters, procedures, etc. to save the storage card.
In the event of a CPU failure, after the replacement of CPU, can be a simple operation,
Restore the system by using the data storage card in advance.
Therefore, it is not necessary to spend time to manage the backup data, but also can shorten the recovery time of the system shutdown.
Q series of basic conversion module, A series of additional basic unit connection adapter unit.
Suitable for: A5 - B/A6 - B.Positioning: 3 axis, built-in counter function, open collector output type.
Control unit: pulse.
Number of location data: 1/ axis.
Maximum output pulse: 100Kpps.
Counter: 3 channels MITSUBISHI Q64TDV-GH.
100Kpps.
Counter input signal: DV5~24V.
40 pin connector.
Positioning control using encoder feedback, especially suitable for conveying system and processing machinery, etc Q64TDV-GH.
In the 1 single module, the 3 axis positioning function and the 3 channel counter function are integrated.
Positioning module, high-speed counter module combined as a whole,
Can effectively use the board slot and save space MITSUBISHI Q64TDV-GH. Express PCI bus.
Support Japanese, English OS.
Multimode fiber optic cable.
Dual loop controller network (control station / common station).
With external power supply function.
Make the mixed data environment intelligent, to achieve a new manufacturing system IE CC-Link field network module.
Using Ethernet cables and connectors available on the market to reduce costs.
High speed communication capable of communicating with 1Gbps MITSUBISHI Q64TDV-GH.
Improve the communication response, significantly shorten the cycle time.
Improve the performance of cycle data update. Reduces the transmission delay time and the application of the synchronization waiting time.
Data can be read or written to other station programmable controller MITSUBISHI Thermocouple type temperature input module.
Status of IE CC-Link field network can be confirmed by Works2 GX.
Can be in the Works2 GX up and down the abnormal position, the cause of the exception, the event record,
So it can reduce the time of abnormal to resume normal operation MITSUBISHI Thermocouple type temperature input module.
MELSECNET/H network module capable of composing large scale flexible network system.
The MELSECNET/H network system includes the PLC network of the control station and the communication between the stations and the remote I/O network in the remote station remote I/O station MITSUBISHI Thermocouple type temperature input module.
Optical fiber loop system...... High speed communication of 10Mbps/25Mbps is realized.
The distance betweenn stations, the length of the total cable length, strong anti-interference Q64TDV-GH.
Coaxial bus system...... Using low cost coaxial cable, the network construction cost is lower than that of the optical fiber loop network.
Twisted pair bus system MITSUBISHI Q64TDV-GH. ..... Combined with high performance price ratio network module and twisted pair cable,
The construction cost of network system is very low.
MITSUBISHI QJ71GF11-T2
Brand: MITSUBISHI
Name: IE CC-Link field network
Model: QJ71GF11-T2
Master / local station sharing.
IE CC-Link field network.
Make the mixed data environment intelligent, to achieve a new manufacturing system IE CC-Link field network module.
Using Ethernet cables and connectors available on the market to reduce costs.
High speed communication capable of communicating with 1Gbps.
Improve the communication response, significantly shorten the cycle time.
Improve the performance of cycle data update. Reduces the transmission delay time and the application of the synchronization waiting time.
Data can be read or written to other station programmable controller.
Status of IE CC-Link field network can be confirmed by Works2 GX.
Can be in the Works2 GX up and down the abnormal position, the cause of the exception, the event record,
So it can reduce the time of abnormal to resume normal operation.
QJ71GF11-T2 can be used as the main station / local station of IE CC-Link field network.
Control axis: maximum 8 axes.
Teaching running function: there (when using SV13).
To stop the speed control function at the specified location.
The servo motor can rotate at a predetermined speed,
After starting the specified location to stop the instruction,
Can be set in advance to stop the location MITSUBISHI QJ71GF11-T2.
You can change the speed by changing the value of the options at the time of the operation,
You can also change the acceleration / deceleration time QJ71GF11-T2
Phase compensation function.
The mixed function of virtual mode and real mode.
Smooth clutch linear acceleration / deceleration function.Output points: 16 points.
Output voltage and current: 24V/AC240V 2A/1; DC point; 8A/1 common end.
Response time: 12ms MITSUBISHI QJ71GF11-T2.
16 points / a common end.
18 point spring clip connection terminal.
Continue to go beyond, to climb the peak of Q series.
Strengthen security function.
Can be set up to 32 characters of the file password.
In addition to the English letters, numbers, but also the use of special characters,
To further enhance the security of the password.
In addition, only pre registered devices are allowed to access CPU,
To intercept unauthorized access to unauthorized users MITSUBISHI QJ71GF11-T2.
Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.
A variety of modules with excellent performance,
Meet the needs of various control from analog to location MITSUBISHI IE CC-Link field network.
Q series module products include a variety of types of I/O, analog and positioning function module MITSUBISHI IE CC-Link field network.
Can fully meet the switch, sensor, such as the input and output, temperature, weight, flow and motor, drive control,
As well as the requirements of high-precision control of the positioning of the industry, the control needs of various fields.
Can also be used in combination with the CPU module to achieve appropriate control MITSUBISHI IE CC-Link field network.
Easy connection programming tool via ethernet.
Programming tools (Works2 GX,, Developer GX) and CPU direct connection (1 to 1),
No need to carry out the IP address settings QJ71GF11-T2. And there is no need to select the cable, the straight line and the cross line can be used.
Therefore, this connection method annd the use of USB, can easily communicate with the CPU,
Even the operators are not familiar with the network settings can easily establish a connection MITSUBISHI QJ71GF11-T2.
Langganan:
Komentar (Atom)