Timer/Counter/Tachometer CTA Series

CTA Timer/Counter/Tachometer is able to receive external input signals and calculate the times of events, frequency and driving speed. CTA can be applied to batch counting, total counting, length measurement, position control, accurate timing, rotation speed and so on.

CTA Timer/Counter/Tachometer features easy and handy parameter settings and tuning and are certified by international standards CE and UL.

Applications :

Label printers, cut-to-length machines

Features & Benefits :

CTA Timer/Counter/Tachometer features easy and handy parameter settings and tuning and are certified by international standards CE and UL.

Specifications :

• Panel size: 48mm x 48mm
• Power input: 100~240VAC, 50/60Hz or DC24V
• Range of input voltage: 85%~110%, rated voltage or DC21.6V~26.4V
• Power consumption: less than 10VA or 5W
• External power supply: 12VDC ± 10%; 100mA
• Display: Double-line 6-digit LCD display
• NPN input: ON impedance 1K ohm max. ON residual voltage: 2V max
• PNP input: high level: 4.5~30VDC; low level: 0~2VDC
• Dielectric strength: 2,000VAC; 50/60Hz for 1 minute

Text Panel Delta TP08G-BT2 Series

The screen of TP08 series can display eight lines text or message at the same time. The series not only has the features of light weight, cost-effective price, good flexibility in use, and easy-to-control operation, but also supports various communication protocols, macro commands and software screen change functions.

Specifications :

• 3.8″ STN-LCD
• Resolution: 240 x 128 dots
• Built-in 1,024KB flash memory
• 24 user-defined function keys
• Built-in RS-232 and RS-422 / RS-485 ports
• Supports recipes and macro functions

Text Panel Delta TP04P Series

The 4-Line Text Panel HMI with Built-in PLC TP04P Series’ adopts a built-in DIO/AIO and combines the functions of a programmable logic controller and touch panel in one device. This series’ screen displays text or messages with four lines at the same time. The TP04P Series is lightweight, flexible in use, provide easy-to-control operation, and also support various communication protocols.

Specifications :

• Adopts the core of the DVP-SS2 Series PLC: program capacity: 8 k steps / D device: 5k words
• Provides 2 sets of 10 kHz high-speed pulse input
• 4.1″ STN-LCD
• Provides 0 ~ 9 numeric keys with user-defined function
• Built-in USB port for program upload/download
• Built-in RS-485 port*2
• Supports MODBUS ASCII/RTU modes
• User-defined boot screen available
• Built-in real time clock (RTC)
• Digital and analog I/O terminals available

Text Panel Delta TP04G-BL-C Series

The 4-Line Text Panel HMI TP04G-BL-C Series displays text or message with four lines at the same time. The TP04G-BL-C Series is lightweight, flexible in use, provide easy-to-control operation, and also support various communication protocols.

Specifications :

• 4.1″ STN LCD (Monochrome)
• 192*64 pixels
• 0~9 numeric keys and user-defined function keys available
• Built-in RS-232 Modbus ASCII/RTU mode
• User-defined boot screen available
• Supports Modbus slave mode

Text Panel Delta TP04G-AL-C/TP04G-AL2 Series

The 4-Line Text Panel HMI TP04G-AL/TP04G-AL2 Series display text or message with four lines at the same time. The TP04G-AL/TP04G-AL2 Series is lightweight, flexible in use, provide easy-to-control operation, and also support various communication protocols.

Specifications :

• 4.1″ STN LCD
• User-defined function keys available
• TP04G-AL2 supports RS-232/RS-422/RS-485 communication ports
• Password protection
• User-defined boot screen available
• Built-in real-time clock

Text Panel Delta TP02G-AS1/TP04G-AS2 Series

The screen of this series can display two lines / four lines text or message at the same time. It not only has the features of light weight, cost-effective price, good flexibility in use, and easy-to-control operation, but also supports various communication protocols.

Specifications :

• STN LCD 2.8″ (TP02G), 3″ (TP04G)
• 160*32 pixels (TP02G), 128*64 pixels (TP04G)
• 256K Flash Memory
• TP02 supports 16 multiple function keys
• TP04 supports 12 multiple function keys
• TP02 supports RS-232 & RS485 ports
• TP04 supports RS-232, RS-485/RS422 ports
• Provide password protection function

Temperature Controller Delta DTV

Temperature Controller DELTA DTV Specifications :

• Single key for switching between auto and manual mode.
• Additional left key for adjusting the number, making parameter settings faster and handier.
• Displaying output percentage for the user to acquire the openness of the valve immediately.
• Control methods are designed entirely for the features of electronic valve.
• DTV have two groups of alarm outputs with 17 modes, for more choices of applications.
• The RS-485 interface allows collecting data from many devices through network on-line monitoring.

Temperature Controller DELTA DTV  designed for the electron valve market, user-friendly, easy to set up and use, competitive, built-in with Modbus, simple data acquisition.
Application
Kilns, controllers for electron valve

Temperature Controller Delta DTK

Features
High resolution LCD display

Length shortened to 60mm

High speed sampling time 100 ms

CE certified

Temperature Controller DELTA DTK.  Series is a new temperature controller with a high cost-performance ratio. It greatly decreases development costs and time, and improves the functions of temperature control systems. With a length of only 60 mm and high resolution LCD display, it is easy for operators to monitor the temperatures of any environment or occasion.
Application
Food packaging, rubber and plastics, electronics industries, HVAC

Temperature Controller Delta DTE

Temperature Controller DELTA DTE  Specifications

• PID, ON/OFF, programmable PID or manual control are available.
• PID auto-tuning
• Programmable control for 8 patterns and 8 steps in each pattern.
• 12 modes ready for alarm output
• 째C or 째F for the temperature unit
• Built-in RS-485 communication interface which supports Modbus ASCII/RTU and baud rate of up to 115,200bps.
• Extendable to maximum 7 DTC2000 digital controllers
• Supports synchronous communication protocol and auto ID setup function.
• Supports various selections of input/output modules, e.g. relay output, voltage pulse output, current output, analog voltage output, parameter display and setup.
• Supports CT functions, over-current and off-line alarm

Temperature Controller DELTA DTE series is a multi-channel modular temperature controller, supporting maximum 8 groups of thermocouple/platinum resistance input. The DIN rail installation saves wires, and the controller on each channel can work independently at the same time. DTE offers several output modules (relay, voltage pulse, current output and linear voltage output). The built-in 2-wire RS-485 communication is able to reach baud rate of 115,200bps. In programmable control, DTE is able to set up 64 sets of different temperature and control time. In addition, maximum 7 DTC2000 controllers are extendable to DTE, and DTE supports the synchronous communication protocol and auto ID setup function which DTC series also supports.
Application
Airconditioning system, plastic machinery

Temperature Controller Delta DTD

Specifications :

• Offering PID, ON/OFF, manual and PID programmable control, for multiple applications.
• Built-in with various kinds of sensors, for flexible switching.
• A group of alarm outputs with 8 modes, for more choices of applications.
• The set value is stored in EEPROM (4K bits) and can be written repeatedly for 1 million times and stored for 10 years. The data are more stable.
• The key-locked function makes the controller safer than other controllers.

Temperature Controller DELTA DTD Improved hardware capability, enhanced software and competitiveness, key operation and parameter display are handier than those in DTA and DTB.
Application
Food-processing equipment, air-conditioning system.

Temperature Controller Delta DTC

DTC Series

The modulized DTC series saves wiring and the parallel modules are able to monitor many temperature points. The flexible output methods enable the user to plan the output modes according to the actual needs. The built-in password protection prevents improper operation or damages caused by the operation staff.

Application :
Blower coil pipe in central air-conditioning system, heating system.

Temperature Controller DELTA DTC Specifications :

• PID / On-Off / manual input / programmable control modes
• 2 groups of outputs for auto-tuning 2 groups of PID parameters
• Able to connect to various thermocouples (B, E, J, K, L, N, R, S, T, U, TXK), platinum RTD (PT100, JPT100), analog current (0 ~ 20mA, 4 ~ 20mA) and linear voltage (0 ~ 5V, 0 ~ 10V)
• Maximum 2 groups of alarm switches are available, with 12 alarm modes each
• LED status display
• Celsius or Fahrenheit temperature display
• Built-in RS-485 communication interface (Modbus ASCII, RTU, baud rate: 2,400 ~ 38,400)
• Sampling time of thermocouple/platinum RTD: 0.4 second/time; sampling time of analog input: 0.15 second/time
• Programmable logic controller is able to set up 64 sets of temperature and control time.
• 3 levels of password protection; wire saving; synchronous communication protocol setting; ID auto setting.
• Technical Document

Temperature Controller Delta DTB

Compared with DTA series, DTB is additionally equipped with linear voltage signal output and dual output control, capable of executing heating and cooling controls simultaneously in a temperature control system and fast reaching the target temperature.

Applications :

• Blower coil pipe in central air-conditioning system, heating system

Temperature Controller DELTA DTB Specifications :

• PID / On-Off / manual input / programmable control modes
• 2 groups of outputs to auto-tuning 2 groups of PID parameters
• Able to connect to various thermocouples (B, E, J, K, L, N, R, S, T, U, TXK), platinum RTD (PT100, JPT100), analog current (0 ~ 20mA, 4 ~ 20mA) and linear voltage (0 ~ 5V, 0 ~ 10V)
• Maximum 3 groups of alarm switches are available, with 18 alarm modes each
• Celsius or Fahrenheit temperature display
• 2 key lock functions (1. lock all keys; 2. lock only function keys, up/down keys are still workable)
• Panel sizes: 4824, 4848, 4896, 9696
• Built-in RS-485 communication interface (Modbus ASCII, RTU, baud rate: 2,400 ~ 38,400)
• Sampling time of thermocouple/platinum RTD: 0.4 second/time; sampling time of analog input: 0.15 second/time
• Programmable logic controller is able to set up 64 sets of temperature and control time.
• Optional CT (wire breaking detection) function, an alarm output
• Optional Event function, using PLC or switches to switch between 2 different set temperatures.
• Optional Valve function, adjusting the open/close of the valve by the output value.

Temperature Controller Delta DTA

DTA series is designed for practical applications with 3 most-frequently adopted signal outputs in the industry and is built-in with various handy functions and transmission structure, ensuring fast and stable transmission of data

Application :

• Blower coil pipe in central air-conditioning system, heating system.

Temperature Controller DELTA DTA Specifications :

• PID / On-Off/ manual input control modes
• Auto-tuning PID parameters
• Various thermocouple (B, E, J, K, L, N, R, S, T, U, TXK) and platinum RTD (PT100, JPT100) can be set by parameters
• Built-in 2 groups of alarm switches with 13 alarm modes each
• Celsius or Fahrenheit temperature display
• 2 key lock functions: (1. lock all keys; 2. lock only function key, up/down keys are still workable)
• Panel size: 4848, 4896, 9648, 7272, 9696
• Optional RS-485 communication interface (Modbus ASCII, RTU, baud rate: 2,400 ~ 38,400)
• Optional CT (wire breaking detection) function, an alarm output
• Sampling time of sensor: 0.5 second/time
• Certifications: IP5X protection, CE, UL

Temp Control Delta DT3

The Delta temperature controller DT3 series is designed with upgraded hardware and higher specifications to offer smart operation, fast response, and easy modularization, plus user-friendly and user-defined function keys. With Self-Tuning and FUZZY temperature control functions, controllers can be installed in both open space and confined space applications and are capable of presenting a smooth temperature control curve

Applications :
Machinery for the printing, food packaging, solar panel manufacturing, and high-tech electronics industries

Specifications :

• Connects to various thermocouples (B, E, J, K, L, N, R, S, T, U, TXK), platinum RTD (PT100, JPT100)
• Large 3-color LCD Display
• Modular design of functional devices lets users replace the module as needed for application flexibility
• Diversified control modes, such as Self-Tuning, FUZZY, PID, ON / OFF, Manual
• Various PID parameter settings
• Retransmission Output
• Remote set value (SV) input
• Dual output control function for heating and cooling
• Heater disconnection detection
• Supports standard MODBUS protocol
• Max. 8 pattern programmable control
• Sampling time 0.1 sec
• IP66 protection level and CE, UL certified

Servo Delta ASDA-MS Series

The ASDA-MS Series integrates robot controller and 4 axes of servo drives to perform mathematical calculations, smooth track planning, and loop control in one unit, greatly enhancing real-time system calculation performance. This design perfectly fulfills the demands of an industrial robots’ complex non-linear system and realizes dynamic compensation to achieve high-speed and high precision.

The ASDA-MS Series also supports the IEC61131-3 standard’s five kinds of programming language and PLCopen motion function block. It offers Delta Robot Languages (DRL) for robot application program development, so that customers can develop customized functions and programs for applications in various industries.

In addition to 4 axes, the ASDA-MS Series can further expand to 6 axes of servo motion control for I/O expansion using Delta’s self-developed high-speed DMCNET communication network, which is suitable for small-scale motion systems with high flexibility and reliability.

The ASDA-MS Series integrates peripheral devices (such as machine vision systems, sensors, and central computers) through various communication interfaces, and matches extension axes via high-speed motion BUS such as MODBUS and MODBUS TCP to build a complete industrial robot solution.

Applications :

• Cartesian robots, SCARA robots, Articulated robots, Delta robots, Other industrial robots

Features & Benefits :

• Integrates robot controller and 4 axes of servo drives in one single unit with high flexibility and reliability
• Up to 10 axes motion control (4-axis robot + 6 external axes). Timely exchange of information for the controller and servo drive for real-time motion control
• Supports the IEC 61131-3 standard for five kinds of programming languages
• Offers Delta Robot Languages (DRL) for developing robot application programs
• Supports G-code programming for path planning for greater application flexibility
• Supports various communication interfaces for easy integration into existing systems

Specifications :

Servo Delta ASDA-M Series

With its innovative and cutting-edge servo drive design, the ASDA-M series gives a new definition to servo system by achieving the perfect combination of motion controller and servo system. The development of the ASDA-M series follows in the footsteps of the successful ASDA-A2 series and offers high resolution, high frequency response, a built-in electronic cam (E-Cam), function of auto notch filter, vibration and resonance suppression, full-closed loop control, friction compensation and a more flexible position register control PR mode. The ASDA-M series also features many robust functions and an advanced design that meets a variety of applications for all types of industrial automation machines.

The ASDA-M series goes beyond the typical servo drive. It includes 3-axis servo drives in one frame to support real-time data exchange among three axes without any time delay and provides 3-axis synchronous motion control with performance better than comparable servo drives. Users can perform 3-axis linear/arc/helical interpolation functions easily. The ASDA-M series also features a new gantry control function for synchronous control that is precisely adapted to pure rigid mechanical systems. The ASDA-M series is your best choice for the highly integrated systems and the high-end machines requiring 3-axis synchronous control.

The ASDA-M series adopts a design that allows three axes to sufficiently share PN power with output power and regenerated power. Less power loss can be achieved through DC bus voltage changes without additional communication links. Compared to general servo systems this 3-in-1 design also reduces the input from the grid with effective energy saving, benefits/cost reduction and reliability enhancement.

In addition, connecting to DMCNET, CANopen and RS-485 communication enables the system to integrate with various extension digital input and output modules and other automation more efficiently. The ASDA-M series has surpassed the traditional servo system structure and provides a new concept for a real-time and reliable motion control network that satisfies the market requirements of industrial automation for a changing world.

Applications :

• SERVO DELTA ASDA-M. High-end machines requiring 3-axis synchronous control / Adhesive dispensing / Gluing machines/ Winding machines / Multi-axis Cartesian robot arms / Gantry control system

Features & Benefits :

• Multi-axis synchronous interpolation
• Advanced gantry control
• Flexible electronic cam (E-Cam) function
• Excellent vibration and resonance suppression for different mechanical applications
• Full-closed loop control (Accuracy of positioning guaranteed)
• Versatile PR mode for various and multiple continuous motion movements

Specifications :
Servo Drive and Servo Motor Combinations