APPLICATIONS - CARTON SEALING MACHINE

If CP1E[][]S1 3-port CPU unit is used, the MX2 inverter can be connected via RS-485 (Modbus-RTU communications) with no additional interface required. In addition, since no I/O points are used, process control is possible with a CP1E CPU Unit of small I/O points.

Mesin Matrial Mixer

APPLICATIONS - MATERIAL MIXER

Use of Drive Programming installed in the inverter makes simple sequence control possible on a single unit inverter basis.

This makes mixing control without a programmable controller possible, thus reducing equipment size and cost. NB Series HMI and MX2 Inverter can be connected to RS-485 (Modbus-RTU communications).

Mesin Packaging / Mesin Pembungkus di Pabrik

APPLICATIONS - PACKAGING MACHINE

If CP1E-N[][]S1(3-port CPU) is used, the E5CC Temperature Controller can be connected via built-in RS-485 serial communication.

If configured with a temperature controller, only a template screen for the control panel is required for the NB Series HMI. Even when the number of temperature control loops is changed, it may not be necessary to change the mounting holes on the control panel screen, depending on the device, thus control panel standardization is possible. As a result, it brings reduction in panel design and production costs.

NB SERIES - Feature-rich, Economical

All Models With 65,536-color TFT LCD Display

Complete HMI family with screen size ranging from 3.5-inch to 10.1-inch wide.

Data can be stored in USB memory^*

*1. USB memory sticks produced by Omron insure operations.
2GB: FZ-MEM2G model
8GB: FZ-MEM8G model

All models comes with Ethernet port

CP1E MICRO PLC - Small Controller, Big Performance

Lineup of 3-port CPU Units

CP1E-N[][]S1 is a CPU unit with three ports including USB port, RS-232C port, and RS-485 port. It can be connected to various devices such as NB Series HMI, inverters, and temperature controllers without the need of optional units.

20mm Reduction in Depth

Depth is 6mm slimmer than the previous CP1E The depth of CP1E-N[][]S(1)with RS-232C connector is reduced by 20mm. Even when used as a set with NB, it contributes to depth reduction in the control panel.

All models come with a USB port

It can be connected to PC programming tools using a commercial USB cable. Without the need for USB conversion cables or special cables, connection is easier and cable cost is low.

NB Series HMI

NB Series HMI
Lineup: 3.5-inch, 5.6-inch, 7-inch wide and 10.1-inch wide

A variety of screen sizes are now available in NB Series!

CP1E Micro PLC

Built-in 3 ports lineup: 30-, 40- and 60-points

Built-in 3 ports models with 30-, 40- and 60-points are now available!

CP1E-N30S1DR-A

CP1E-N30S1DT-D

CP1E-N40S1DR-A

CP1E-N40S1DT-D

CP1E-E60S1DR-A

CP1E-E60S1DT-D